Ntp daemon logs (ipv6)
Hello,
Running Lenny, I am seeing the following ntp logs under "daemon.log":
***
Dec 1 07:33:36 serv2 ntpd[3841]: ntpd 4.2.4p4@1.1520-o Mon May 11 20:13:01 UTC 2009 (1)
Dec 1 07:33:36 serv2 ntpd[3842]: precision = 1.000 usec
Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #1 wildcard, ::#123 Disabled
Dec 1 07:33:36 serv2 ntpd[3842]: bind() fd 18, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Dec 1 07:33:36 serv2 ntpd[3842]: unable to create socket on bond0 (2) for fe80::230:48ff:fe76:c1ba#123
Dec 1 07:33:36 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba
Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #3 lo, ::1#123 Enabled
Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #5 bond0, 172.16.0.11#123 Enabled
Dec 1 07:33:36 serv2 ntpd[3842]: kernel time sync status 0040
Dec 1 07:33:36 serv2 ntpd[3842]: frequency initialized 28.424 PPM from /var/lib/ntp/ntp.drift
Dec 1 07:36:16 serv2 ntpd[3949]: signal_no_reset: signal 17 had flags 4000000
Dec 1 07:36:17 serv2 ntpd[3842]: bind() fd 21, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Dec 1 07:36:17 serv2 ntpd[3842]: unable to create socket on bond0 (6) for fe80::230:48ff:fe76:c1ba#123
Dec 1 07:36:17 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba
Dec 1 07:38:58 serv2 ntpd_initres[3949]: signal_no_reset: signal 14 had flags 4000000
Dec 1 07:41:17 serv2 ntpd[3842]: bind() fd 21, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Dec 1 07:41:17 serv2 ntpd[3842]: unable to create socket on bond0 (7) for fe80::230:48ff:fe76:c1ba#123
Dec 1 07:41:17 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba
Dec 1 07:46:17 serv2 ntpd[3842]: bind() fd 21, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address
Dec 1 07:46:17 serv2 ntpd[3842]: unable to create socket on bond0 (8) for fe80::230:48ff:fe76:c1ba#123
Dec 1 07:46:17 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba
***
These entries are being repeated every 5 minutes or so, flooding the "dameon.log" file.
It seems ntpd tries to bind to the ipv6 address of the "bond0" interface and fails.
Any clue on this? :-?
Greetings,
--
Camaleón
Reply to: