Re: Kingston DataTraveler 8Gb USB Key
Plugin / Replugin it a couple of time did work after all...
[274398.736634] usb-storage: device found at 4
[274398.736636] usb-storage: waiting for device to settle before scanning
[274400.265709] usb 6-4: USB disconnect, address 4
[274400.534063] usb 6-4: new high speed USB device using ehci_hcd and address 5
[274400.668124] usb 6-4: New USB device found, idVendor=0951, idProduct=160f
[274400.668127] usb 6-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[274400.668129] usb 6-4: Product: DT Mini Slim
[274400.668130] usb 6-4: Manufacturer: Kingston
[274400.668132] usb 6-4: SerialNumber: 0019E06B07B5F9A1879A0D15
[274400.668212] usb 6-4: configuration #1 chosen from 1 choice
[274400.668668] scsi13 : SCSI emulation for USB Mass Storage devices
[274400.668890] usb-storage: device found at 5
[274400.668892] usb-storage: waiting for device to settle before scanning
[274405.656423] usb-storage: device scan complete
[274405.657133] scsi 13:0:0:0: Direct-Access Kingston DT Mini Slim
1.00 PQ: 0 ANSI: 2
[274405.658504] sd 13:0:0:0: Attached scsi generic sg4 type 0
[274405.661953] sd 13:0:0:0: [sdd] 15654848 512-byte hardware sectors:
(8.01 GB/7.46 GiB)
[274405.662497] sd 13:0:0:0: [sdd] Write Protect is off
[274405.662500] sd 13:0:0:0: [sdd] Mode Sense: 16 0f 09 51
[274405.662502] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[274405.664775] sd 13:0:0:0: [sdd] Assuming drive cache: write through
[274405.664778] sdd: sdd1
[274405.665692] sd 13:0:0:0: [sdd] Attached SCSI removable disk
[274406.352670] FAT: utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
On Mon, Nov 16, 2009 at 3:31 PM, Mathieu Malaterre
<mathieu.malaterre@gmail.com> wrote:
> Hi there,
>
> I just bought a Kingston DataTraveler 8Gb USB key, and when I
> plugged it into the USB on the tower, all I get is:
>
> $ dmesg
> ...
> [267822.124172] usb-storage: device scan complete
> [267822.128220] scsi 10:0:0:0: Direct-Access Generic Flash HS-CF
> 5.39 PQ: 0 ANSI: 0
> [267822.131704] scsi 10:0:0:1: Direct-Access Generic Flash
> HS-COMBO 5.39 PQ: 0 ANSI: 0
> [267822.133362] sd 10:0:0:0: Attached scsi generic sg1 type 0
> [267822.133441] sd 10:0:0:1: Attached scsi generic sg2 type 0
> [267822.138096] sd 10:0:0:0: [sda] Attached SCSI removable disk
> [267822.141987] sd 10:0:0:1: [sdb] Attached SCSI removable disk
> [273699.860399] usb 2-1: new full speed USB device using uhci_hcd and address 2
> [273699.984149] usb 2-1: device descriptor read/64, error -71
> [273700.207904] usb 2-1: device descriptor read/64, error -71
> [273700.427274] usb 2-1: new full speed USB device using uhci_hcd and address 3
> [273700.550459] usb 2-1: device descriptor read/64, error -71
> [273700.775461] usb 2-1: device descriptor read/64, error -71
> [273700.990785] usb 2-1: new full speed USB device using uhci_hcd and address 4
> [273701.407136] usb 2-1: device not accepting address 4, error -71
> [273701.520355] usb 2-1: new full speed USB device using uhci_hcd and address 5
> [273701.932871] usb 2-1: device not accepting address 5, error -71
> [273701.932891] hub 2-0:1.0: unable to enumerate USB device on port 1
>
>
> Has anyone seen this before ?
>
> Thx
> --
> Mathieu
>
--
Mathieu
Reply to: