Re: How to install Debian on a server with a LSISAS1068E controller
On 2009-10-26T21:14:45, David Liontooth wrote:
> Do you have the PCI ID for the controller this worked on? Did it need
> megaraid_sas or mptsas?
You need to change a dip switch on the motherboard from the
default RAID to "IT" mode. Then obtain a firmware from
SuperMicro to flash the card. Here is lspci and dmesg output:
# lspci -k | grep -A1 LSI
03:00.0 SCSI storage controller: LSI Logic / Symbios Logic
SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
Kernel driver in use: mptsas
[ 86.039080] Fusion MPT base driver 3.04.07
[ 86.039082] Copyright (c) 1999-2008 LSI Corporation
[ 86.039087] Fusion MPT SAS Host driver 3.04.07
[ 86.039117] mptsas 0000:03:00.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 86.039142] mptbase: ioc0: Initiating bringup
[ 86.316043] ioc0: LSISAS1068E B3: Capabilities={Initiator}
[ 86.316060] mptsas 0000:03:00.0: setting latency timer to 64
...
[ 98.422283] scsi4 : ioc0: LSISAS1068E B3, FwRev=011a0000h,
Ports=1, MaxQ=478, IRQ=16
/Allan
--
Allan Wind
Life Integrity, LLC
<http://lifeintegrity.com>
Reply to: