Re: Can't write iso image to cd [2.6.30]
On Wed, Sep 16, 2009 at 02:00:20PM +0200, Rob Gom wrote:
> Hi there,
Hi,
> I can't write iso image to blank cd under Linux. Under windows xp the
> same works fine.
OK. Then maybe this ...
> ~# hdparm -i /dev/sr0
> /dev/sr0:
> Model=HL-DT-ST DVD+/-RW GH50N , FwRev=B102 ,
> SerialNo=K3997G74144
> (upgraded fw from B101 when it failed)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
shouldn't be an issue?
or this?
> End of the cdrecord log:
> Disk type: Short strategy type (Phthalocyanine or similar)
> Manuf. index: 69
> Manufacturer: Moser Baer India Limited
> Manufacturer is guessed because of the orange forum embargo.
> The orange forum likes to get money for recent information.
> The information for this media may not be correct.
> Capacity Blklen/Sparesz. Format-type Type
> 0 2048 0x00 No Media Present or Unknown Capacity
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 334298
> Starting to write CD/DVD/BD at speed 48 in real SAO mode for single session.
Try burning at a slower speed.
> Starting new track at sector: 0
> Track 01: 0 of 49 MB written./opt/cdrtools-orig/bin/cdrecord:
> Input/output error. write_g1: scsi sendcmd: no error
> CDB: 2A 00 00 00 01 17 00 00 1F 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 80 30 05 00 00
> Sense Key: 0x5 Illegal Request, Segment 0
> Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> What else can I do? I can wait for 2.6.31 and see if it helps. But I
> would like not to waste too much cds ...
Try different media. It seems Windows XP knows more about the firmware
upgrade and those CD's than Linux does, so use Windows in the meantime
to do your burning.
--
chris
Reply to: