Usb, XEN and Debian (long)
I have XEN installation which includes Debian lenny system as Dom0
and Ubuntu 9.04 Server as DomU. I want Ubuntu system to become the
printing server for my home network and to have cups, samba and foomatic
(should I explain why I'd like to put those in the toughest sandbox
available).
I have two USB printers, which I want to make accessible within the DomU
installation but I'm having problems getting the USB 'passtrough' to
work. The examples below show the situation with the first printer
attached.
I'm not sure where to ask for advice. I'll appreciate any.
Dom0 - dmesg
============
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-xen-686 (Debian 2.6.26-15lenny2)
(dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian
4.1.2-25)) #1 SMP Mon May 11 21:51:55 UTC 2009
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 0000000058aed000 (usable)
[ 0.000000] 690MB HIGHMEM available.
[ 0.000000] 728MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 363245) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 186368
[ 0.000000] HighMem 186368 -> 363245
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 363245
[ 0.000000] On node 0 totalpages: 363245
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1424 pages used for memmap
[ 0.000000] Normal zone: 180848 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1382 pages used for memmap
[ 0.000000] HighMem zone: 175495 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] found SMP MP-table at [f564fbf0] 000f9bf0
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000EAA10, 0014 (r0 COMPAQ)
[ 0.000000] ACPI: RSDT 000E6740, 0070 (r1 COMPAQ CPQ0050 20020815
0)
[ 0.000000] ACPI: FACP 000E67F8, 0074 (r1 COMPAQ BROOKDG 1
0)
[ 0.000000] ACPI: DSDT 000E68C6, 0B73 (r1 COMPAQ DSDT 1
MSFT 100000E)
[ 0.000000] ACPI: FACS 000E6700, 0040
[ 0.000000] ACPI: SSDT 000E7439, 073D (r1 COMPAQ PROJECT 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E7B76, 053A (r1 COMPAQ CORE_PNP 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E80B0, 019B (r1 COMPAQ CORE_UTL 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E824B, 0308 (r1 COMPAQ VILLTBL1 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E8553, 053F (r1 COMPAQ LGCYLITE 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E8A92, 0167 (r1 COMPAQ UART2 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E8BF9, 014E (r1 COMPAQ FLOPPY 1
MSFT 100000E)
[ 0.000000] ACPI: APIC 000E686C, 005A (r1 COMPAQ BROOKDG 1
0)
[ 0.000000] ACPI: SSDT 000EA6BE, 00B2 (r1 COMPAQ APIC 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E91B5, 0424 (r1 COMPAQ PNP_PRSS 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E95D9, 016D (r1 COMPAQ UR2_PRSS 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E9746, 0119 (r1 COMPAQ FPY_PRSS 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E98F7, 0135 (r1 COMPAQ S3 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E9A2C, 013B (r1 COMPAQ CORE_S3 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E9B67, 0173 (r1 COMPAQ PIDETM 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000E9E52, 0180 (r1 COMPAQ GTF0 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000EA461, 00F0 (r1 COMPAQ L08 1
MSFT 100000E)
[ 0.000000] ACPI: SSDT 000EA859, 0053 (r1 COMPAQ FINIS 1
MSFT 100000E)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 60000000 (gap:
5f800000:9f400000)
[ 0.000000] PERCPU: Allocating 28552 bytes of per cpu data
[ 0.000000] NR_CPUS: 32, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 360407
[ 0.000000] Kernel command line: root=/dev/hda1 ro console=tty0
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Xen reported: 2392.072 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [hvc-1] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Software IO TLB enabled:
[ 0.004000] Aperture: 2 megabytes
[ 0.004000] Kernel range: c208c000 - c228c000
[ 0.004000] Address size: 24 bits
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Memory: 1409016k/1452980k available (1844k kernel code,
34844k reserved, 741k data, 196k init, 707508k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xf5555000 - 0xf57ff000 (2728 kB)
[ 0.004000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.004000] vmalloc : 0xee000000 - 0xf4ffe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xed800000 ( 728 MB)
[ 0.004000] .init : 0xc038f000 - 0xc03c0000 ( 196 kB)
[ 0.004000] .data : 0xc02cd0e8 - 0xc03868a0 ( 741 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02cd0e8 (1844 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 1.136068] Calibrating delay using timer specific routine.. 4790.45
BogoMIPS (lpj=9580901)
[ 1.136371] Security Framework initialized
[ 1.136508] SELinux: Disabled at boot.
[ 1.136638] Capability LSM initialized
[ 1.136781] Mount-cache hash table entries: 512
[ 1.137172] Initializing cgroup subsys ns
[ 1.137304] Initializing cgroup subsys cpuacct
[ 1.137432] Initializing cgroup subsys devices
[ 1.137595] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 1.137828] CPU: L2 cache: 512K
[ 1.137971] Checking 'hlt' instruction... OK.
[ 1.138606] SMP alternatives: switching to UP code
[ 1.167795] Freeing SMP alternatives: 16k freed
[ 1.167934] ACPI: Core revision 20080321
[ 1.170594] ENABLING IO-APIC IRQs
[ 1.170861] Brought up 1 CPUs
[ 1.171880] CPU0 attaching NULL sched-domain.
[ 1.174930] net_namespace: 660 bytes
[ 1.175400] NET: Registered protocol family 16
[ 1.176162] ACPI: bus type pci registered
[ 1.176462] PCI: Using configuration type 1 for base access
[ 1.176602] Setting up standard PCI resources
[ 1.178585] ACPI: EC: Look up EC in DSDT
[ 1.180457] ACPI: Interpreter enabled
[ 1.180595] ACPI: (supports S0 S1 S3 S5)
[ 1.181155] ACPI: Using IOAPIC for interrupt routing
[ 1.186077] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.188147] pci 0000:00:1f.0: quirk: region f800-f87f claimed by ICH4
ACPI/GPIO/TCO
[ 1.188300] pci 0000:00:1f.0: quirk: region fa00-fa3f claimed by ICH4
GPIO
[ 1.189402] PCI: Transparent bridge - 0000:00:1e.0
[ 1.189597] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.189793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[ 1.193713] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14
15)
[ 1.195108] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14
15)
[ 1.196515] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14
15) *0, disabled.
[ 1.198132] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14
15)
[ 1.199518] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14
15)
[ 1.200924] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14
15) *0, disabled.
[ 1.202529] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14
15) *0, disabled.
[ 1.204143] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14
15)
[ 1.205641] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 1.205818] pnp: PnP ACPI init
[ 1.205956] ACPI: bus type pnp registered
[ 1.209621] pnp: PnP ACPI: found 15 devices
[ 1.209756] ACPI: ACPI bus type pnp unregistered
[ 1.209944] xen_mem: Initialising balloon driver.
[ 1.210625] PCI: Using ACPI for IRQ routing
[ 1.211187] ACPI: RTC can wake from S4
[ 1.211367] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 1.211505] system 00:0d: ioport range 0x400-0x41f has been reserved
[ 1.211635] system 00:0d: ioport range 0x420-0x43f has been reserved
[ 1.211765] system 00:0d: ioport range 0x440-0x45f has been reserved
[ 1.211895] system 00:0d: ioport range 0x460-0x47f has been reserved
[ 1.212015] system 00:0d: ioport range 0xf800-0xf81f has been
reserved
[ 1.212179] system 00:0d: ioport range 0xf820-0xf83f has been
reserved
[ 1.212311] system 00:0d: ioport range 0xf840-0xf85f has been
reserved
[ 1.212442] system 00:0d: ioport range 0xf860-0xf87f has been
reserved
[ 1.212573] system 00:0d: ioport range 0xfa00-0xfa3f has been
reserved
[ 1.212704] system 00:0d: ioport range 0xfc00-0xfc7f has been
reserved
[ 1.212834] system 00:0d: ioport range 0xfc80-0xfcff has been
reserved
[ 1.212965] system 00:0d: ioport range 0xfe00-0xfe7f has been
reserved
[ 1.213095] system 00:0d: ioport range 0xfe80-0xfeff has been
reserved
[ 1.213234] system 00:0e: iomem range 0x0-0x9ffff could not be
reserved
[ 1.213365] system 00:0e: iomem range 0x100000-0x5f7fffff could not
be reserved
[ 1.213510] system 00:0e: iomem range 0x5f800000-0x5f8fffff has been
reserved
[ 1.213641] system 00:0e: iomem range 0xe0000-0xfffff could not be
reserved
[ 1.213773] system 00:0e: iomem range 0xfec01000-0xffffffff could not
be reserved
[ 1.213917] system 00:0e: iomem range 0xcc400-0xdffff has been
reserved
[ 1.214800] PCI: Bridge: 0000:00:1e.0
[ 1.214934] IO window: 1000-1fff
[ 1.215074] MEM window: 0xfc500000-0xfc7fffff
[ 1.215211] PREFETCH window: disabled.
[ 1.215385] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1.215429] NET: Registered protocol family 2
[ 1.215709] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 1.216367] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 1.218053] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 1.219208] TCP: Hash tables configured (established 131072 bind
65536)
[ 1.219384] TCP reno registered
[ 1.219789] NET: Registered protocol family 1
[ 1.220157] checking if image is initramfs... it is
[ 1.305598] Freeing initrd memory: 14329k freed
[ 1.306528] audit: initializing netlink socket (disabled)
[ 1.306687] type=2000 audit(1243059737.304:1): initialized
[ 1.307110] highmem bounce pool size: 64 pages
[ 1.307357] VFS: Disk quotas dquot_6.5.1
[ 1.307517] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 1.307679] msgmni has been set to 1483
[ 1.307974] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 1.308195] io scheduler noop registered
[ 1.308322] io scheduler anticipatory registered
[ 1.308449] io scheduler deadline registered
[ 1.308589] io scheduler cfq registered (default)
[ 1.308741] pci 0000:00:02.0: Boot video device
[ 1.308934] pci 0000:05:08.0: Firmware left e100 interrupts enabled;
disabling
[ 1.312987] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 1.313409] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.313773] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.314543] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.314984] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.317099] brd: module loaded
[ 1.317346] Xen virtual console successfully installed as hvc0
[ 1.317534] Event-channel device installed.
[ 1.325885] netfront: Initialising virtual ethernet driver.
[ 1.326369] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at
0x60,0x64 irq 1,12
[ 1.326811] i8042.c: Warning: Keylock active.
[ 1.860336] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.860478] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.860833] mice: PS/2 mouse device common for all mice
[ 1.861130] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.861300] rtc0: alarms up to one month, y3k
[ 1.861482] No iBFT detected.
[ 1.862261] TCP cubic registered
[ 1.862388] NET: Registered protocol family 17
[ 1.862531] Using IPI No-Shortcut mode
[ 1.862833] registered taskstats version 1
[ 1.863137] rtc_cmos 00:03: setting system clock to 2009-05-23
06:22:17 UTC (1243059737)
[ 1.863569] Freeing unused kernel memory: 196k freed
[ 2.080806] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.080961] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.742276] usbcore: registered new interface driver usbfs
[ 2.742460] usbcore: registered new interface driver hub
[ 2.742634] usbcore: registered new device driver usb
[ 2.756559] USB Universal Host Controller Interface driver v3.0
[ 2.756786] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level,
low) -> IRQ 16
[ 2.757052] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.757062] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.757339] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 1
[ 2.757550] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002440
[ 2.757836] usb usb1: configuration #1 chosen from 1 choice
[ 2.757986] hub 1-0:1.0: USB hub found
[ 2.757986] hub 1-0:1.0: 2 ports detected
[ 2.858558] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.858710] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.858853] usb usb1: Product: UHCI Host Controller
[ 2.858981] usb usb1: Manufacturer: Linux 2.6.26-2-xen-686 uhci_hcd
[ 2.859113] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.859315] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level,
low) -> IRQ 19
[ 2.859585] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.859595] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.859753] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 2
[ 2.859965] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002460
[ 2.860256] usb usb2: configuration #1 chosen from 1 choice
[ 2.860422] hub 2-0:1.0: USB hub found
[ 2.860567] hub 2-0:1.0: 2 ports detected
[ 2.962577] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 2.962724] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.962868] usb usb2: Product: UHCI Host Controller
[ 2.962995] usb usb2: Manufacturer: Linux 2.6.26-2-xen-686 uhci_hcd
[ 2.963123] usb usb2: SerialNumber: 0000:00:1d.1
[ 3.526928] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level,
low) -> IRQ 23
[ 3.527233] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.527243] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.527432] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 3
[ 3.531565] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.531709] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 3.531735] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc480000
[ 3.546758] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 3.547040] usb usb3: configuration #1 chosen from 1 choice
[ 3.547212] hub 3-0:1.0: USB hub found
[ 3.547366] hub 3-0:1.0: 6 ports detected
[ 3.644004] Uniform Multi-Platform E-IDE driver
[ 3.644148] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 3.654078] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002
[ 3.654222] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.654364] usb usb3: Product: EHCI Host Controller
[ 3.654489] usb usb3: Manufacturer: Linux 2.6.26-2-xen-686 ehci_hcd
[ 3.654617] usb usb3: SerialNumber: 0000:00:1d.7
[ 3.663011] ICH4: IDE controller (0x8086:0x24cb rev 0x01) at PCI
slot 0000:00:1f.1
[ 3.663176] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007)
[ 3.663324] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level,
low) -> IRQ 18
[ 3.663585] ICH4: not 100% native mode: will probe irqs later
[ 3.663735] ICH4: IDE port disabled
[ 3.663871] ide0: BM-DMA at 0x24a0-0x24a7
[ 3.664026] Probing IDE interface ide0...
[ 3.801141] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 3.801284] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.911851] floppy0: Unable to grab DMA2 for the floppy driver
[ 3.951413] hda: HDS722516VLAT80, ATA DISK drive
[ 4.624067] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 4.624399] hda: UDMA/100 mode selected
[ 4.624922] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.640505] ACPI: PCI Interrupt 0000:05:08.0[A] -> GSI 20 (level,
low) -> IRQ 20
[ 4.731020] e100: eth0: e100_probe: addr 0xfc500000, irq 20, MAC addr
00:0b:cd:1e:e4:de
[ 4.735970] No dock devices found.
[ 4.746905] SCSI subsystem initialized
[ 4.759017] libata version 3.00 loaded.
[ 4.798852] hda: max request size: 512KiB
[ 4.799466] hda: Host Protected Area detected.
[ 4.799469] current capacity is 321670847 sectors (164695 MB)
[ 4.799471] native capacity is 321672960 sectors (164696 MB)
[ 4.800506] hda: Host Protected Area disabled.
[ 4.800640] hda: 321672960 sectors (164696 MB) w/7938KiB Cache,
CHS=20023/255/63
[ 4.801275] hda: cache flushes supported
[ 4.801500] hda:<6>udev: renamed network interface eth0 to eth1
[ 4.804700] hda1 hda2 hda4 < hda5 hda6 hda7 hda8 >
[ 6.928010] floppy0: no floppy controllers found
[ 7.076176] kjournald starting. Commit interval 5 seconds
[ 7.076332] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.235651] udevd version 125 started
[ 9.245856] Linux agpgart interface v0.103
[ 9.252476] agpgart: Detected an Intel 830M Chipset.
[ 9.253463] agpgart: Detected 8060K stolen memory.
[ 9.268139] agpgart: AGP aperture is 128M @ 0xf0000000
[ 9.386850] input: Power Button (FF) as /class/input/input0
[ 9.398669] ACPI: Power Button (FF) [PWRF]
[ 9.398965] input: Power Button (CM) as /class/input/input1
[ 9.422799] ACPI: Power Button (CM) [PBTN]
[ 10.492211] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03
(30-Apr-2008)
[ 10.492472] iTCO_wdt: Found a ICH4 TCO device (Version=1,
TCOBASE=0xf860)
[ 10.492655] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.509397] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 10.531613] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 10.734664] intel_rng: Firmware space is locked read-only. If you
can't or
[ 10.734668] intel_rng: don't want to disable this in firmware setup,
and if
[ 10.734670] intel_rng: you are certain that your system has a
functional
[ 10.734672] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 10.785210] input: PC Speaker as /class/input/input2
[ 10.812329] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level,
low) -> IRQ 17
[ 10.812681] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 10.865431] floppy0: Unable to grab DMA2 for the floppy driver
[ 10.970782] parport_pc 00:07: reported by Plug and Play ACPI
[ 10.971041] parport0: PC-style at 0x378 (0x778), irq 7
[PCSPP,TRISTATE]
[ 11.232084] intel8x0_measure_ac97_clock: measured 54699 usecs
[ 11.232228] intel8x0: clocking to 48000
[ 13.880374] floppy0: no floppy controllers found
[ 14.596931] Adding 3903752k swap on /dev/hda5. Priority:-1 extents:1
across:3903752k
[ 14.855277] EXT3 FS on hda1, internal journal
[ 15.269569] loop: module loaded
[ 16.164280] e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
[ 17.561479] NET: Registered protocol family 10
[ 17.561915] lo: Disabled Privacy Extensions
[ 23.005668] Bridge firewalling registered
[ 23.008607] tmpbridge: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM
feature.
[ 23.185745] ADDRCONF(NETDEV_UP): peth1: link is not ready
[ 23.188469] e100: peth1: e100_watchdog: link up, 100Mbps, full-duplex
[ 23.188873] ADDRCONF(NETDEV_CHANGE): peth1: link becomes ready
[ 23.215727] device peth1 entered promiscuous mode
[ 23.243538] eth1: port 1(peth1) entering learning state
[ 23.246180] eth1: topology change detected, propagating
[ 23.246334] eth1: port 1(peth1) entering forwarding state
[ 23.951995] suspend: event channel 20
[ 30.695797] device vif1.0 entered promiscuous mode
[ 30.720025] eth1: port 2(vif1.0) entering learning state
[ 30.721198] eth1: topology change detected, propagating
[ 30.721344] eth1: port 2(vif1.0) entering forwarding state
[ 30.831668] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 31.968758] blkback: ring-ref 8, event-channel 8, protocol 1
(x86_32-abi)
[ 31.978762] blkback: ring-ref 9, event-channel 9, protocol 1
(x86_32-abi)
[ 33.761648] peth1: no IPv6 routers present
[ 34.206590] eth1: no IPv6 routers present
[ 40.927428] vif1.0: no IPv6 routers present
[ 41.433023] device vif2.0 entered promiscuous mode
[ 41.464683] eth1: port 3(vif2.0) entering learning state
[ 41.465550] eth1: topology change detected, propagating
[ 41.465692] eth1: port 3(vif2.0) entering forwarding state
[ 45.559232] blkback: ring-ref 8, event-channel 9, protocol 1
(x86_32-abi)
[ 45.571738] blkback: ring-ref 9, event-channel 10, protocol 1
(x86_32-abi)
[ 52.264364] vif2.0: no IPv6 routers present
[471678.154033] usb 2-1: new full speed USB device using uhci_hcd and
address 2
[471678.344934] usb 2-1: configuration #1 chosen from 1 choice
[471678.346742] usb 2-1: New USB device found, idVendor=03f0,
idProduct=1717
[471678.346791] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[471678.346857] usb 2-1: Product: hp LaserJet 3020
[471678.346885] usb 2-1: Manufacturer: Hewlett-Packard
[471678.346915] usb 2-1: SerialNumber: 00CNBF039917
[471678.429248] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto
2 vid 0x03F0 pid 0x1717
[471678.429331] usbcore: registered new interface driver usblp
[472033.697357] usb 2-1: USB disconnect, address 2
[472033.697592] usblp0: removed
[472044.793495] usb 2-1: new full speed USB device using uhci_hcd and
address 3
[472044.984969] usb 2-1: configuration #1 chosen from 1 choice
[472044.989193] usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto
2 vid 0x03F0 pid 0x1717
[472044.989358] usb 2-1: New USB device found, idVendor=03f0,
idProduct=1717
[472044.989391] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[472044.989436] usb 2-1: Product: hp LaserJet 3020
[472044.989464] usb 2-1: Manufacturer: Hewlett-Packard
[472044.989493] usb 2-1: SerialNumber: 00CNBF039917
[472859.670823] eth1: port 3(vif2.0) entering disabled state
[472859.684238] eth1: port 3(vif2.0) entering disabled state
[472870.155564] device vif3.0 entered promiscuous mode
[472870.168380] eth1: port 3(vif3.0) entering learning state
[472870.169600] eth1: topology change detected, propagating
[472870.169649] eth1: port 3(vif3.0) entering forwarding state
[472872.659689] blkback: ring-ref 8, event-channel 9, protocol 1
(x86_32-abi)
[472872.668920] blkback: ring-ref 9, event-channel 10, protocol 1
(x86_32-abi)
[472880.277229] vif3.0: no IPv6 routers present
[473157.236612] eth1: port 3(vif3.0) entering disabled state
[473157.250079] eth1: port 3(vif3.0) entering disabled state
[473159.558460] device vif4.0 entered promiscuous mode
[473159.571282] eth1: port 3(vif4.0) entering learning state
[473159.573733] eth1: topology change detected, propagating
[473159.573787] eth1: port 3(vif4.0) entering forwarding state
[473162.008690] blkback: ring-ref 8, event-channel 9, protocol 1
(x86_32-abi)
[473162.070396] blkback: ring-ref 9, event-channel 10, protocol 1
(x86_32-abi)
[473169.792045] vif4.0: no IPv6 routers present
[482203.265638] eth1: port 3(vif4.0) entering disabled state
[482203.278956] eth1: port 3(vif4.0) entering disabled state
[482205.612319] device vif5.0 entered promiscuous mode
[482205.625353] eth1: port 3(vif5.0) entering learning state
[482205.626236] eth1: topology change detected, propagating
[482205.626281] eth1: port 3(vif5.0) entering forwarding state
[482207.026620] blkback: ring-ref 8, event-channel 9, protocol 1
(x86_32-abi)
[482207.039350] blkback: ring-ref 9, event-channel 10, protocol 1
(x86_32-abi)
[482215.684629] vif5.0: no IPv6 routers present
[511008.881655] usb 2-1: USB disconnect, address 3
[511008.881887] usblp0: removed
[516835.629702] usb 2-1: new full speed USB device using uhci_hcd and
address 4
[516835.820921] usb 2-1: configuration #1 chosen from 1 choice
[516835.825115] usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto
2 vid 0x03F0 pid 0x1717
[516835.825278] usb 2-1: New USB device found, idVendor=03f0,
idProduct=1717
[516835.825311] usb 2-1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[516835.825356] usb 2-1: Product: hp LaserJet 3020
[516835.825384] usb 2-1: Manufacturer: Hewlett-Packard
[516835.825413] usb 2-1: SerialNumber: 00CNBF039917
dom0 - lsusb
============
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 03f0:1717 Hewlett-Packard LaserJet 3020
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dom0 - /etc/xen/printserv (domain configuration file)
======================================================
kernel = "/boot/vmlinuz-2.6.28-11-server"
ramdisk = "/boot/initrd.img-2.6.28-11-server"
root = "/dev/xvda7"
memory = 256
name = "printserv"
disk = [ "phy:hda7,xvda7,w", "phy:hda8,xvda8,w" ]
vif = [ 'ip=192.168.1.7' ]
on_crash = "restart"
usb = 1
usbdevice = [ "host:03f0:1717" ]
domU - dmesg
============
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-server (buildd@palmer) (gcc
version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17
02:48:10 UTC 2009 (Ubuntu 2.6.28-11.42-server)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] ACPI in unprivileged domain disabled
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000000125c000 (usable)
[ 0.000000] Xen: 000000000125c000 - 000000000129f000 (reserved)
[ 0.000000] Xen: 000000000129f000 - 0000000010000000 (usable)
[ 0.000000] DMI not present or invalid.
[ 0.000000] last_pfn = 0x10000 max_arch_pfn = 0x1000000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 0000000000093000 (usable)
[ 0.000000] modified: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000000125c000 (usable)
[ 0.000000] modified: 000000000125c000 - 000000000129f000 (reserved)
[ 0.000000] modified: 000000000129f000 - 0000000010000000 (usable)
[ 0.000000] kernel direct mapping tables up to 10000000 @
12ab000-132f000
[ 0.000000] RAMDISK: 008ab000 - 0125c000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 10000000
[ 0.000000] low ram: 00000000 - 10000000
[ 0.000000] bootmap 00010000 - 00012000
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 -
0010000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008aae2c] TEXT DATA BSS ==>
[0000100000 - 00008aae2c]
[ 0.000000] #4 [00008ab000 - 000125c000] RAMDISK ==>
[00008ab000 - 000125c000]
[ 0.000000] #5 [000129f000 - 00012ab000] INIT_PG_TABLE ==>
[000129f000 - 00012ab000]
[ 0.000000] #6 [00012ab000 - 0001320000] PGTABLE ==>
[00012ab000 - 0001320000]
[ 0.000000] #7 [0000010000 - 0000012000] BOOTMAP ==>
[0000010000 - 0000012000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00010000
[ 0.000000] HighMem 0x00010000 -> 0x00010000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x00000093
[ 0.000000] 0: 0x00000100 -> 0x0000125c
[ 0.000000] 0: 0x0000129f -> 0x00010000
[ 0.000000] On node 0 totalpages: 65347
[ 0.000000] free_area_init_node: node 0, pgdat c06e5480, node_mem_map
c1320000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3942 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60893 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with
"lapic"
[ 0.000000] PM: Registered nosave memory: 0000000000002000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 -
0000000000010000
[ 0.000000] PM: Registered nosave memory: 0000000000093000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000000125c000 -
000000000129f000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap:
10000000:f0000000)
[ 0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] trying to map vcpu_info 0 at c1524020, mfn 34f5f, offset
32
[ 0.000000] cpu 0 using vcpu_info at c1524020
[ 0.000000] Xen: using vcpu_info placement
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 64835
[ 0.000000] Kernel command line: root=/dev/xvda7
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 2392.032 MHz processor.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] console [hvc0] enabled
[ 0.010000] Dentry cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.010000] Inode-cache hash table entries: 16384 (order: 4, 65536
bytes)
[ 0.010000] allocated 1310720 bytes of page_cgroup
[ 0.010000] please try cgroup_disable=memory option if you don't want
[ 0.010000] Scanning for low memory corruption every 60 seconds
[ 0.010000] Memory: 239224k/262144k available (4180k kernel code,
21912k reserved, 2255k data, 548k init, 0k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xf5478000 - 0xf57ff000 (3612 kB)
[ 0.010000] pkmap : 0xf5000000 - 0xf5200000 (2048 kB)
[ 0.010000] vmalloc : 0xd0800000 - 0xf4ffe000 ( 583 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.010000] .init : 0xc0751000 - 0xc07da000 ( 548 kB)
[ 0.010000] .data : 0xc0515003 - 0xc0748fc0 (2255 kB)
[ 0.010000] .text : 0xc0100000 - 0xc0515003 (4180 kB)
[ 0.010000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.010000] SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.010000] Xen: using vcpuop timer interface
[ 0.010000] installing Xen timer for CPU 0
[ 0.010000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4784.06 BogoMIPS (lpj=23920320)
[ 0.010000] Security Framework initialized
[ 0.010000] SELinux: Disabled at boot.
[ 0.010000] AppArmor: AppArmor initialized
[ 0.010000] Mount-cache hash table entries: 512
[ 0.010000] Initializing cgroup subsys ns
[ 0.010000] Initializing cgroup subsys cpuacct
[ 0.010000] Initializing cgroup subsys memory
[ 0.010000] Initializing cgroup subsys freezer
[ 0.010000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.010000] CPU: L2 cache: 512K
[ 0.010000] CPU: Hyper-Threading is disabled
[ 0.010000] SMP alternatives: switching to UP code
[ 0.121697] Freeing SMP alternatives: 18k freed
[ 0.121892] cpu 0 spinlock event irq 1
[ 0.126005] Brought up 1 CPUs
[ 0.126054] CPU0 attaching NULL sched-domain.
[ 0.126929] net_namespace: 776 bytes
[ 0.126970] Booting paravirtualized kernel on Xen
[ 0.126982] Xen version: 3.2-1
[ 0.127606] Grant table initialized
[ 0.147615] Time: 165:165:165 Date: 165/165/65
[ 0.147636] regulator: core version 0.5
[ 0.147743] NET: Registered protocol family 16
[ 0.150273] EISA bus registered
[ 0.150523] PCI: Fatal: No config space access function found
[ 0.153350] ACPI: Interpreter disabled.
[ 0.153585] xen_balloon: Initialising balloon driver.
[ 0.154850] SCSI subsystem initialized
[ 0.155007] libata version 3.00 loaded.
[ 0.155153] usbcore: registered new interface driver usbfs
[ 0.155214] usbcore: registered new interface driver hub
[ 0.155307] usbcore: registered new device driver usb
[ 0.155642] PCI: System does not support PCI
[ 0.155658] PCI: System does not support PCI
[ 0.155762] Bluetooth: Core ver 2.13
[ 0.155762] NET: Registered protocol family 31
[ 0.155762] Bluetooth: HCI device and connection manager initialized
[ 0.155762] Bluetooth: HCI socket layer initialized
[ 0.155762] NET: Registered protocol family 8
[ 0.155762] NET: Registered protocol family 20
[ 0.155762] NetLabel: Initializing
[ 0.155762] NetLabel: domain hash size = 128
[ 0.155762] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.160019] NetLabel: unlabeled traffic allowed by default
[ 0.160222] AppArmor: AppArmor Filesystem Enabled
[ 0.160238] pnp: PnP ACPI: disabled
[ 0.160251] PnPBIOS: Disabled
[ 0.160706] NET: Registered protocol family 2
[ 0.160788] IP route cache hash table entries: 2048 (order: 1, 8192
bytes)
[ 0.160788] TCP established hash table entries: 8192 (order: 4, 65536
bytes)
[ 0.160788] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.160788] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.160788] TCP reno registered
[ 0.160788] NET: Registered protocol family 1
[ 0.160788] checking if image is initramfs... it is
[ 0.170041] Switched to high resolution mode on CPU 0
[ 0.213550] Freeing initrd memory: 9924k freed
[ 0.213781] platform rtc_cmos: registered platform RTC device (no PNP
device found)
[ 0.213815] cpufreq: No nForce2 chipset.
[ 0.214115] audit: initializing netlink socket (disabled)
[ 0.214169] type=2000 audit(1243577780.148:1): initialized
[ 0.223150] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.225831] VFS: Disk quotas dquot_6.5.1
[ 0.225993] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.227445] fuse init (API version 7.10)
[ 0.227677] msgmni has been set to 531
[ 0.228159] alg: No test for stdrng (krng)
[ 0.228235] io scheduler noop registered
[ 0.228264] io scheduler anticipatory registered
[ 0.228297] io scheduler deadline registered (default)
[ 0.228347] io scheduler cfq registered
[ 0.228473] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.228507] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 0.228675] isapnp: Write Data Register 0xa79 already used
[ 0.232836] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.234871] brd: module loaded
[ 0.235696] loop: module loaded
[ 0.235932] Fixed MDIO Bus: probed
[ 0.235951] PPP generic driver version 2.4.2
[ 0.236098] input: Macintosh mouse button emulation
as /devices/virtual/input/input0
[ 0.236176] Driver 'sd' needs updating - please use bus_type methods
[ 0.236213] Driver 'sr' needs updating - please use bus_type methods
[ 0.237563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.237616] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.237654] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.237788] usbcore: registered new interface driver libusual
[ 0.237875] usbcore: registered new interface driver usbserial
[ 0.237913] USB Serial support registered for generic
[ 0.237953] usbcore: registered new interface driver
usbserial_generic
[ 0.237968] usbserial: USB Serial Driver core
[ 0.238060] PNP: No PS/2 controller found. Probing ports directly.
[ 0.238918] i8042.c: No controller found.
[ 0.239581] mice: PS/2 mouse device common for all mice
[ 0.239778] rtc_cmos: probe of rtc_cmos failed with error -16
[ 0.239954] device-mapper: uevent: version 1.0.3
[ 0.240229] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel@redhat.com
[ 0.240386] device-mapper: multipath: version 1.0.5 loaded
[ 0.240402] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 0.240590] EISA: Probing bus 0 at eisa.0
[ 0.240605] EISA: Cannot allocate resource for mainboard
[ 0.240619] Cannot allocate resource for EISA slot 1
[ 0.240633] Cannot allocate resource for EISA slot 2
[ 0.240646] Cannot allocate resource for EISA slot 3
[ 0.240659] Cannot allocate resource for EISA slot 4
[ 0.240672] Cannot allocate resource for EISA slot 5
[ 0.240685] Cannot allocate resource for EISA slot 6
[ 0.240698] Cannot allocate resource for EISA slot 7
[ 0.240711] Cannot allocate resource for EISA slot 8
[ 0.240723] EISA: Detected 0 cards.
[ 0.240809] cpuidle: using governor ladder
[ 0.240821] cpuidle: using governor menu
[ 0.241674] TCP cubic registered
[ 0.241809] NET: Registered protocol family 10
[ 0.242551] lo: Disabled Privacy Extensions
[ 0.243100] NET: Registered protocol family 17
[ 0.243153] Bluetooth: L2CAP ver 2.11
[ 0.243165] Bluetooth: L2CAP socket layer initialized
[ 0.243180] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.243191] Bluetooth: SCO socket layer initialized
[ 0.243296] Bluetooth: RFCOMM socket layer initialized
[ 0.243323] Bluetooth: RFCOMM TTY layer initialized
[ 0.243335] Bluetooth: RFCOMM ver 1.10
[ 0.243406] IO APIC resources could be not be allocated.
[ 0.243421] Using IPI No-Shortcut mode
[ 0.243628] registered taskstats version 1
[ 0.243661] XENBUS: Device with no driver: device/console/0
[ 0.243674] XENBUS: Device with no driver: device/vbd/51719
[ 0.243686] XENBUS: Device with no driver: device/vbd/51720
[ 0.243698] XENBUS: Device with no driver: device/vif/0
[ 0.243739] Magic number: 1:252:3141
[ 0.243792] /build/buildd/linux-2.6.28/drivers/rtc/hctosys.c: unable
to open rtc device (rtc0)
[ 0.243809] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.243823] EDD information not available.
[ 0.244875] Freeing unused kernel memory: 548k freed
[ 0.247433] Write protecting the kernel text: 4184k
[ 0.248373] Write protecting the kernel read-only data: 1552k
[ 0.604315] blkfront: xvda7: barriers enabled
[ 0.605267] blkfront: xvda8: barriers enabled
[ 1.571980] PM: Starting manual resume from disk
[ 1.572003] PM: Resume from partition 202:8
[ 1.572009] PM: Checking hibernation image.
[ 1.572754] PM: Resume from disk failed.
[ 1.587643] kjournald starting. Commit interval 5 seconds
[ 1.587695] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.237086] udev: starting version 141
[ 3.446945] Initialising Xen virtual ethernet driver.
[ 4.883480] lp: driver loaded but no devices found
[ 5.211671] Adding 3903752k swap on /dev/xvda8. Priority:-1
extents:1 across:3903752k
[ 5.663396] EXT3 FS on xvda7, internal journal
[ 7.215747] type=1505 audit(1243577787.148:2):
operation="profile_load" name="/sbin/dhclient-script" name2="default"
pid=1249
[ 7.216151] type=1505 audit(1243577787.148:3):
operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1249
[ 7.216283] type=1505 audit(1243577787.148:4):
operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default"
pid=1249
[ 7.216397] type=1505 audit(1243577787.148:5):
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
name2="default" pid=1249
[ 8.053404] type=1505 audit(1243577787.988:6):
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf"
name2="default" pid=1254
[ 8.053929] type=1505 audit(1243577787.988:7):
operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1254
[ 8.299702] type=1505 audit(1243577788.228:8):
operation="profile_load" name="/usr/sbin/tcpdump" name2="default"
pid=1286
[ 12.969349] ppdev: user-space parallel port driver
[ 18.370035] eth0: no IPv6 routers present
domU - lsusb
============
(nothing)
Reply to: