[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Extrange behaviour in arp with xen 3.0.3 from etch [ solved ]



On Fri, May 8, 2009 at 10:50 AM, Javier Barroso <javibarroso@gmail.com> wrote:
> On Fri, May 8, 2009 at 10:14 AM, Javier Barroso <javibarroso@gmail.com> wrote:
>> Hello,
>>
>> I have a etch xen server with a virtual machine with 2 network
>> interfaces configured. Every interface has a different mac, and inside
>> the host has a different ip.
>>
>> However I can see with tcpdump and arpwatch (I discover this because
>> arpwatch told me), about the two ips has the two macs.
>>
>> I asked it in xen chat channel, but I hadn't got response.
>>
>> itsm:~# ip add
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
>>    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>    inet 127.0.0.1/8 scope host lo
>>    inet6 ::1/128 scope host
>>       valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> state UP qlen 1000
>>    link/ether 00:16:3e:7c:64:e0 brd ff:ff:ff:ff:ff:ff
>>    inet 192.168.110.54/16 brd 192.168.255.255 scope global eth0
>>    inet6 fe80::216:3eff:fe7c:64e0/64 scope link
>>       valid_lft forever preferred_lft forever
>> 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> state UP qlen 1000
>>    link/ether 00:16:3e:7c:64:e1 brd ff:ff:ff:ff:ff:ff
>>    inet 192.168.100.4/16 brd 192.168.255.255 scope global eth1
>>    inet6 fe80::216:3eff:fe7c:64e1/64 scope link
>>       valid_lft forever preferred_lft forever
>
> Ok my error.
>
> Sorry for the silly post.
>
> I changed from 2 interface to ip virtual with eth0 and eth1 and it
> seems to works
I wanted to say eth0 and eth0:0


Reply to: