RE: update to Lenny - eth not found
Hi,
By going to Lenny the kernel changed
I would assume then, you need to re-run /usr/bin/vmware-config-tools.pl and restart networking, or reboot, did you do that?
Which version is the esxi? 3.5update3? update4 is now out, its supposed to have better support for vmware tools.
regards
Steven
-----Original Message-----
From: Mario Batz [mailto:BatzMario@gmx.net]
Sent: Wednesday, 29 April 2009 3:54 p.m.
To: debian-user@lists.debian.org
Subject: update to Lenny - eth not found
Hallo,
i have an ESXi with debian as guest with vmwaretools.
i update debian etch to lenny, and the update shows no errors. But the
kernel 2.6.26 dont find eth0. If i boot with 2.6.18, the system find eth0
and all works fine.
Bootmessage
------------
Configurating network interfaces ... SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
Bla bla bla
Failed to bring up eth0
------------
I checked this
- "/etc/modules" have loop, fuse, vmxnet and e1000
- "lsmod" list the driver "e1000", but "used by" 0
- "ifconfig -a" shows only "lo"
- "dmesg | grep eth0" shows "Driver 'sd' needs updating - please use
bus_type methods"
- "lspci -v" with the old kernel:
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (rev 01)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 01)
00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 08)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 08)
00:0f.0 VGA compatible controller: VMware Inc [VMware SVGA II] PCI Display
Adapter
00:10.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X
Fusion-MPT Dual Ultra320 SCSI (rev 01)
00:11.0 Ethernet controller: Intel Corporation 82545EM Gigabit Ethernet
Controller (Copper) (rev 01)
00:12.0 Memory controller: VMware Inc Unknown device 0801 (rev 01)
- "lspci -v" with the new kernel (empty rows are dropped):
00:00.0 Class 0600: Unknown device 8086:7190 (rev 01)
Subsystem: Unknown device 15ad:1976
Flags: bus master, medium devsel, latency 0
00:01.0 Class 0604: Unknown device 8086:7191 (rev 01)
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
00:07.0 Class 0601: Unknown device 8086:7110 (rev 08)
Subsystem: Unknown device 15ad:1976
Flags: bus master, medium devsel, latency 0
00:07.1 Class 0101: Unknown device 8086:7111 (rev 01) (prog-if 8a [Master
SecP PriP])
Subsystem: Unknown device 15ad:1976
Flags: bus master, medium devsel, latency 64
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled]
[size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled]
[size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled]
[size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled]
[size=1]
I/O ports at 1050 [size=16]
00:07.3 Class 0680: Unknown device 8086:7113 (rev 08)
Subsystem: Unknown device 15ad:1976
Flags: medium devsel, IRQ 9
00:0f.0 Class 0300: Unknown device 15ad:0405
Subsystem: Unknown device 15ad:0405
Flags: medium devsel
I/O ports at 1060 [size=16]
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Memory at f4000000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at f1010000 [disabled] [size=32K]
00:10.0 Class 0100: Unknown device 1000:0030 (rev 01)
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at 1080 [size=128]
Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at f1018000 [disabled] [size=16K]
00:11.0 Class 0200: Unknown device 15ad:0720 (rev 10)
Subsystem: Unknown device 15ad:0720
Flags: medium devsel, IRQ 11
I/O ports at 1400 [size=64]
[virtual] Expansion ROM at f1000000 [disabled] [size=64K]
I moved "70-persistent-net.rules", but the system dont recreate the file
Anyone have an idea?
Thx a lot.
Mit freundlichen Grüßen
Mario Batz
--
Haeufig gestellte Fragen und Antworten (FAQ):
http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an
debian-user-german-REQUEST@lists.debian.org
mit dem Subject "unsubscribe". Probleme? Mail an listmaster@lists.debian.org
(engl)
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
Reply to: