Florian Kulzer wrote:
On Sun, Mar 15, 2009 at 22:05:20 +0100, Dirk Vervoort wrote:
Florian Kulzer wrote:
On Sat, Mar 14, 2009 at 23:22:32 +0100, Dieder Vervoort wrote:
I can' t make xhost to work.
I searched around but couldn' t find a solution.
[...]
dieder@koala:~$ xhost +
access control disabled, clients can connect from any host
If your goal is to run X applications via ssh, then I would try this:
http://www.debian.org/doc/manuals/reference/ch-tune.en.html#s-xssh
[...]
Many thanks, because the remote system is light, I do not prefer to use
SSH ( sorry, the line telenet 192.168.1.8 was missing in the problem
description))
When I telnet from a Slackware client to the remote host running Lenny +
JWM-desktop it is working fine !
So the problem is client pc running Lenny + KDE + xhost + does not
accept incoming TCP + X
The first thing to check is if X really was started without "-nolisten
tcp":
$ ps -ef | grep "[/]bin/X "
root 9482 9480 0 22:49 tty7 00:00:01 /usr/bin/X -br :0 vt7 -auth /var/run/xauth/A:0-qdt4bc
...and if X is actually listening on port 6000:
# netstat -plant | grep 6000
tcp 0 0 0.0.0.0:6000 0.0.0.0:* LISTEN 9482/X
tcp6 0 0 :::6000 :::* LISTEN 9482/X
If that has gone wrong than you did not remove the "-nolisten tcp"
option from the relevant file; this depends on how you start X. For
example, if you use KDM to start your X session then you have to change
ServerArgsLocal=-nolisten tcp
to
ServerArgsLocal=
in /etc/kde3/kdm/kdmrc.
If you can confirm that your server is listening on port 6000 then you
probably should check if you have a local iptables rule that blocks
connections to this port.
Hi Florian,
I booted from Lenny-KDE 3.5 from a USB-key
Did some tests again, here are the results,
dieder@panda:~$ xhost +
access control disabled, clients can connect from any host
dieder@panda:~$ export DISPLAY=127.0.0.1:0
dieder@panda:~$ xclock
Error: Can't open display: 127.0.0.1:0
dieder@panda:~$ ps -ef | grep "[/]bin/X "
root 3588 3585 1 21:50 tty7 00:00:45 /usr/bin/X -br
-nolisten tcp :0 vt7 -auth /var/run/xauth/A:0-4dB4fg
# -nolisten ! > check config files:
dieder@panda:~$ cat /etc/X11/xinit/xserverrc
#!/bin/sh
# $Id: xserverrc 189 2005-06-11 00:04:27Z branden $
exec /usr/bin/X11/X
dieder@panda:~$ cat /etc/kde3/kdm/kdmrc|grep ServerArgsLocal
ServerArgsLocal=
dieder@panda:~$
Any other idea ?
Thanks,
Dieder.
|