Bls: Installing a Broadcom 4312 rev 02 wifi card
I once ran into similar problem with different broadcomm wireless
device and got it sorted
http://forums.debian.net/viewtopic.php?t=34590&highlight=
2009/3/1, Celejar <celejar@gmail.com>:
> On Fri, 27 Feb 2009 17:14:55 -0800
> consultores1 <consultores1@gmail.com> wrote:
>
>> El vie, 27-02-2009 a las 16:22 -0500, Celejar escribió:
>> > On Fri, 27 Feb 2009 15:39:55 +0100
>> > Korrignu <korrignu@gmail.com> wrote:
>> >
>> > ...
>> >
>> >
>> > > 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g
>> > > (rev 01)
>> >
>> > ...
>> >
>> > > [ 630.553689] Broadcom 43xx driver loaded [ Features: PMLR,
>> > > Firmware-ID: FW13 ]
>> > >
>> > > it seems weird that there is only one line about the b43 module...
>> >
>> > The driver is definitely not picking up the card. Here's what it should
>> > look like:
>> >
>> > [ 2620.611136] b43-phy2: Broadcom 4318 WLAN found (core revision 9)
>> > [ 2620.626037] b43-phy2 debug: Found PHY: Analog 3, Type 2, Revision 7
>> > [ 2620.626062] b43-phy2 debug: Found Radio: Manuf 0x17F, Version 0x2050,
>> > Revision 8
>> > [ 2620.636899] phy2: Selected rate control algorithm 'minstrel'
>> > [ 2620.637796] Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID:
>> > FW13 ]
>>
>> It is well documented that b43 + bcm43xx at the same box create
>> conflicts. It looks as if you have both installed, do you?
>
> I do not. 'Broadcom 43xx' does not refer to bcm43xx, and b43 is
> working fine. [I'm not the OP, who's experiencing problems.]
>
> Celejar
> --
> mailmin.sourceforge.net - remote access via secure (OpenPGP) email
> ssuds.sourceforge.net - A Simple Sudoku Solver and Generator
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact
> listmaster@lists.debian.org
>
>
--
Regards,
Umarzuki Mochlis
http://gameornot.net
Reply to: