On Wed, 04 Feb 2009 17:02:18 +0100, Frederik Kriewitz wrote:
On Wed, Feb 4, 2009 at 3:21 PM, Hendrik Boom <hendrik@topoi.pooq.com>
wrote:
Fun. Lost of symlinks. Can I use these to identify the drives to be
used in RAID pairs or for LLVM?
Yes
by-uuid seems to miss one of the SATA drives completely, although it
does list one SATA drive, the IDE drive, and the plugged-in USB drive.
And although the symbolic links point to partitions, it doesn't mention
anything but the first partition on /dev/sda1.
/dev/disk/by-uuid:
total 0
lrwxrwxrwx 1 root root 10 2009-01-21 10:53
233b1187-918e-4d12a396-5ea2242912f4 -> ../../sda1 lrwxrwxrwx 1 root
root 10 2009-01-21 10:53 ab38a373-751e-4aff-98ab-89cda2c54726 ->
../../hda1 lrwxrwxrwx 1 root root 10 2009-02-04 06:41
f7b4688d-ad49-4a6d-88ca-77c6865ff894 -> ../../sdc1
Nor does it list my llvm or RAID devices here. Presumably that's
because they aren't real disks, and I should seek them elsewhere.
But I'm wondering about the missing SATA drive by-uuid. Its first
partition is mounted as /dev/sdb1, and I can read and write it.
There might be duplicate UUIDs. Have a look at the blkid and/or vol_id
tool(s). In case of a raid/lvm (or in any other case of a logical
device) I use the named devices in /dev/mapper/ to mount them.
So do I.
I use the
by-path links for identifying disks by there physical position (e.g. in
a bay) or the model/serial-number links in /dev/disk/by-id to identify a
specific device independent of it's physical position/connection.
I suppose that will work for the immediate purpose. But having one
primary ext3 partition present in by-uuid and another missing is, to say
the least, disquieting.
It doesn't look like there's a duplicate UUID. /dev/sda and /dev/sdb
are each new drives, on which I've created one one-gigabyte
partition, and their uuid's are here.
april:~# blkid
/dev/sda1: UUID="233b1187-918e-4d12-a396-5ea2242912f4" SEC_TYPE="ext2" TYPE="ext3"
/dev/hda1: UUID="ab38a373-751e-4aff-98ab-89cda2c54726" LABEL="/" TYPE="reiserfs"
/dev/hda2: TYPE="swap"
/dev/mapper/VG1-lvol0: UUID="0b3f1cca-5c55-45f3-9f48-548ccb947489" TYPE="reiserfs"
/dev/mapper/VG1-lv--farhome: UUID="f3e6a0b2-70ab-4481-aa75-a2f416cb550c" SEC_TYPE="ext2" TYPE="ext3"
/dev/mapper/VG1-usr: LABEL="etchusr" UUID="80507f9a-fb33-4d58-98b4-75d8ebdc0152" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdb1: UUID="81704330-011b-40cb-9154-194ea3839ee7" SEC_TYPE="ext2" TYPE="ext3"
/dev/sdc1: UUID="f7b4688d-ad49-4a6d-88ca-77c6865ff894" SEC_TYPE="ext2" TYPE="ext3"
april:~#
So the uuid's are all different, yet /dev/sdb1 is missing from the
by-uuid directory:
april:~# ls -l /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root 10 2009-01-21 10:53 233b1187-918e-4d12-a396-5ea2242912f4 -> ../../sda1
lrwxrwxrwx 1 root root 10 2009-01-21 10:53 ab38a373-751e-4aff-98ab-89cda2c54726 -> ../../hda1
lrwxrwxrwx 1 root root 10 2009-02-04 06:41 f7b4688d-ad49-4a6d-88ca-77c6865ff894 -> ../../sdc1
april:~#
I see why /dev/sda2 might be missing from the by-uuid list: it's a swap
partition, and presumably has no UUID but is instead recognized by
its partition's type code.