Re: modprobe snd-cs46xx error ALSA 1.0.17 with kernel 2.6.26-1-686

[Bernd Kloss <b.kloss@t-online.de>]

Question teh other way:

Has anybody the driver for the Cirrus Logic running under 2.6.26-1-686?

If so, how?

Tankyou
Bernd



Am Samstag, 30. August 2008 schrieb Bernd Kloss:
> Lenny
> alsa-driver-1.0.17
> Kernel 2.6.26-1-686
> Cirrus Logic cs46xx
>
> Hello
>
>  for the previous kernel 2.6.25-2-686 I could compile the audiodrivers
> without problems. After kernel-update 2.6.26-1-686 I repeated the same
> procedure without errors except the last step
> modprobe snd-cs46xx
>
> Following errors are given back:
>
> WARNING: Error inserting snd_ac97_codec
> (/lib/modules/2.6.26-1-686/kernel/sound/pci/ac97/snd-ac97-codec.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> WARNING: Error inserting snd_ac97_codec
> (/lib/modules/2.6.26-1-686/kernel/sound/pci/ac97/snd-ac97-codec.ko):
> Unknown symbol in module, or unknown parameter (see dmesg)
> FATAL: Error inserting snd_cs46xx
> (/lib/modules/2.6.26-1-686/kernel/sound/pci/cs46xx/snd-cs46xx.ko): Unknown
> symbol in module, or unknown parameter (see dmesg)
> FATAL: Error running install command for snd_cs46xx
>
>
> DMESG reports:
>
> [ *725.576042] snd_ac97_codec: Unknown symbol snd_verbose_printk
> [ *725.636698] snd_ac97_codec: Unknown symbol snd_verbose_printk
> [ *725.641998] snd_cs46xx: Unknown symbol snd_ac97_write_cache
> [ *725.642113] snd_cs46xx: Unknown symbol snd_ac97_resume
> [ *725.642533] snd_cs46xx: Unknown symbol snd_ac97_update_bits
> [ *725.642585] snd_cs46xx: Unknown symbol snd_ac97_mixer
> [ *725.642656] snd_cs46xx: Unknown symbol snd_ac97_bus
> [ *725.642762] snd_cs46xx: Unknown symbol snd_verbose_printk
> [ *725.642989] snd_cs46xx: Unknown symbol snd_ac97_suspend
> [ *725.643912] snd_cs46xx: Unknown symbol snd_ac97_write
> [ *725.643964] snd_cs46xx: Unknown symbol snd_ac97_read
>
>
> In lib/modules/2.6.26-1-686/modules.dep no snd_* is found.
>
> No success with depmod -a 'uname -r', no further messages.
>
> In /lib/modules/2.6.26-1-686 there is a file
> !build
> but I cannot read it.
>
> What can I do to make my soundcard work with ALSA?
>
>
> Thank you for helping
>
> Bernd