Re: can't configure networking for static IP address
On Aug 10, 5:20 pm, Andrei Popescu <andreimpope...@gmail.com> wrote:
> On Sun,10.Aug.08, 12:48:48, Vwaju wrote:
>
> [...]
>
> > I installed Debian on my Dell Dimension 4100 and, with networking
> > configured for DHCP, I am able to connect to the Internet, ftp, http,
> > etc.
>
> > I am building an internet server, so I need to reconfigure networking
> > to use a static IP address. I edited /etc/network/interfaces, using
> > the static IP address leased to me by my RCN (and the other network
> > parameters RCN provided).
>
> [...]
>
> > iface eth0 inet static
> > address 207.237.37.110
> > netmask 255.255.255.224
> > network 207.237.37.96
> > broadcast 207.237.37.127
> > gateway 207.237.37.97
>
> [...]
>
> > Relevant observation:
>
> > With the network configured for DHCP, when I run ifconfig I get:
>
> > Inet addr: 192.168.2.3
> > Bcast: 192.168.2.255
> > Mask: 255.255.255.0
>
> How is your computer *physically* connected to the internet?
>
> (BTW, you should read on private network addresses [1] )
>
> > Full Disclosure
>
> > I am running Debian sarge, because that is the version that was used
> > in the book I am following to learn how to build an internet server.
> > I realize this raises security issues, but I am not building a
> > production server, only a *training* server.
>
> > More to the point: Although sarge is no longer state-of-the-art, I
> > assume it should still be possible to configure it as an internet
> > server with a static IP address!
>
> As you've been told several times, sarge is not suited for the Big Bad
> Internet. I think you can use etch instead, the differences won't be
> that big and the release notes can help.
>
> [1]http://en.wikipedia.org/wiki/Private_network
>
> Regards,
> Andrei
> --
> If you can't explain it simply, you don't understand it well enough.
> (Albert Einstein)
>
> signature.asc
> < 1KViewDownload
Reply to: