[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: pc doesn't start



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Lóránd Erik wrote:
> ...and the pc is in a wooden box:D but the connector is grounded, could
> that be the problem?
> 
> 2008/7/27 Lóránd Erik <lammmer80@gmail.com <mailto:lammmer80@gmail.com>>
> 
>     Hi
> 
>     It's isn't a very debian-specific question, but the os on the pc is
>     debian:P
> 
>     I just want to ask, that what could be the problem, when after
>     shutdown, it doesn't start? The fans doesn't start, no nothing, i
>     have maybe some clues: i installed before lm-sensors, and it wrote
>     "ALARM" for some voltage values [about ~6 alarm captionsxD from the
>     ~10] so... i don't have a backup psu, but i think that could be the
>     problem.
> 
>     what else could it be?
> 
>     ps.: i could bring the pc to life, when i take out the bios battery
>     for a few minutes:O so i'm not 100% sure that the psu is bad:S
> 
>     Thank you
> 
> 
would just start with the process of elimination.  remove pci cards,
reseat ram.   shutdown and boot before and after re inserting each pci
card.  check the ps connections to mb, and check the switch to turn
power on?  if all ok, replace ps.



- --
Steve Reilly

http://reillyblog.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iD8DBQFIjKl/UpqfZIdKFyERAvgSAKDI0Pi83I9E7/60zirWDEEzf9Xs+gCdEzEg
CKpr4N36jJgOQvl0Eu7gaUU=
=W2Sq
-----END PGP SIGNATURE-----


Reply to: