Re: D-Link DWL-122 Wireless Adapter
El vie, 09-05-2008 a las 12:21 -0700, francisco escribió:
> El mié, 16-04-2008 a las 09:01 +0200, Sven Joachim escribió:
> > On 2008-04-16 03:35 +0200, francisco wrote:
> >
> > > Hello
> > >
> > > Does somebody knows how to install the DWL-122 Wireless Adapter?
> >
> > Which revision is that? It should be printed on the packing, if you
> > can't find it, run lsusb as root and post the results.
> >
>
> debian:/home/user1# lsusb
> Bus 002 Device 001: ID 0000:0000
> Bus 001 Device 003: ID 046d:c018 Logitech, Inc.
> Bus 001 Device 001: ID 0000:0000
>
>
> > > I'm using testing-gnome,
> >
> > Kernel version would also be interesting.
> >
>
> Linux debian 2.6.24-1-amd64 #1 SMP Fri Apr 18 23:08:22 UTC 2008 x86_64
> GNU/Linux
>
> > > and i did:
> > >
> > > 1. install linux-wlan-ng
> > > 2. write wlancfg-"essid"
> > > 3. load up modules # modprobe prism2_usb prism2_doreset=1
> > > 4. # wlanctl-ng wlan0 lnxreq_ifstate ifstate=enable
> > > 5. # wlanctl-ng wlan0 lnxreq_autojoin ssid=<your ssid>
> > > authtype=opensystem
> > > 6. configuration.
> > >
> > > But, the adapter doesn't work!
> >
> > For newer revisions of the adapter (rev. C1), make sure to install the
> > firmware-ralink package from non-free.
> >
>
> debian:/home/user1# dmesg | grep usb
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> usb usb1: configuration #1 chosen from 1 choice
> usb 1-6: new low speed USB device using ohci_hcd and address 2
> usb 1-6: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver hiddev
> input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on
> usb-0000:00:0b.0-6
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> usb 1-6: USB disconnect, address 2
> usb usb2: configuration #1 chosen from 1 choice
> usb 1-6: new low speed USB device using ohci_hcd and address 3
> usb 1-6: configuration #1 chosen from 1 choice
> input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on
> usb-0000:00:0b.0-6
> usb 1-3: new full speed USB device using ohci_hcd and address 4
> usb 1-3: device descriptor read/64, error -62
> usb 1-3: device descriptor read/64, error -62
> usb 1-3: new full speed USB device using ohci_hcd and address 5
> usb 1-3: device descriptor read/64, error -62
> usb 1-3: device descriptor read/64, error -62
> usb 1-3: new full speed USB device using ohci_hcd and address 6
> usb 1-3: device not accepting address 6, error -62
> usb 1-3: new full speed USB device using ohci_hcd and address 7
> usb 1-3: device not accepting address 7, error -62
>
> > Sven
> >
> >
Reply to: