Re: problemas

[Håkon Alstadheim <hakon@alstadheim.priv.no>]

Carlos Enrique Carleos Artime wrote:
> Hello!
>
> I have a home network with three computers (A, B and C).
>
> Computer A has a direct connection to internet by a cable-modem.
> It has interfaces:
> - eth0 to internet, uses DHCP
> - eth1 to computer B, static IP-address: 192.168.0.2
> Its operating system is Debian etch, with default 
> IPMASQ configuration.  I added:
>  route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.0.1 eth1
> to /etc/init.d/bootmisc.sh (first) and to /etc/init.d/ipmasq (then)
>
> Computer B is connected to both A and C.
> Its interfaces:
> - rl0 to computer A, IP 192.168.0.1
> - ural0 to computer B, IP 192.168.2.1
> It runs FreeBSD 6.3, confirgured while install to be gateway.
>
> Computer C is connected to B.  Interface:
> - ural0 to computer B, IP 192.168.2.2
> It has FreeBSD 6.3 and OpenBSD 4.0.
>
>   
(snip)

One more information item to check: what range of addresses is assigned 
on eth0? Better make sure that it is not in 192.168.0.0/16 (i.e. not in 
a subnet of that /16).