Re: bcm43xx problem
On Wed, Oct 31, 2007 at 00:55:07 +0200, Sinan Nalkaya wrote:
> Hi,
>
> i have updated Etch installed, Dell inspiron 1501 laptop, which has broadcom
> wireless chip on it. i followed the every instruction step by step on
> http://bcm43xx.berlios.de/ . since i have an supported chip (4311 rev1)
> according to the list on bcm43xx homepage, i installed the
> bcm43xx-fwcutter, run it and get the needed *.fw files under
> /lib/firmware, but udev couldnt create device file for my
> wireless ethernet. here is the commands i typed and results.
>
> sinan:/home/sinan# lspci -nn | grep 14e4
> 05:00.0 Network controller [0280]: Broadcom Corporation Dell Wireless 1390 WLAN Mini-PCI Card [14e4:4311] (rev 01)
> 08:00.0 Ethernet controller [0200]: Broadcom Corporation BCM4401-B0 100Base-TX [14e4:170c] (rev 02)
> sinan:/home/sinan#modprobe bcm43xx
> dmesg;
> ieee80211_crypt: registered algorithm 'NULL'
> ieee80211: 802.11 data/management/control stack, git-1.1.13
> ieee80211: Copyright (C) 2004-2005 Intel Corporation
> bcm43xx driver
I think you would see more "bcm43xx" lines if the driver worked
properly.
> lsmod;
> bcm43xx 408640 0
> firmware_class 10048 1 bcm43xx
> ieee80211softmac 27456 1 bcm43xx
> ieee80211 30664 2 bcm43xx,ieee80211softmac
> ieee80211_crypt 6272 1 ieee80211
>
> udev-monitor;
> sinan:/sys/class/net# udevmonitor
> udevmonitor prints the received event from the kernel [UEVENT]
> and the event which udev sends out after rule processing [UDEV]
>
> UEVENT[1193788238.883126] add@/module/ieee80211_crypt
> UDEV [1193788238.884073] add@/module/ieee80211_crypt
> UEVENT[1193788238.886112] add@/module/ieee80211
> UDEV [1193788238.887048] add@/module/ieee80211
> UEVENT[1193788238.888978] add@/module/ieee80211softmac
> UDEV [1193788238.889910] add@/module/ieee80211softmac
> UEVENT[1193788238.891280] add@/module/firmware_class
> UEVENT[1193788238.894374] add@/module/bcm43xx
> UEVENT[1193788238.906811] add@/bus/pci/drivers/bcm43xx
> UDEV [1193788238.907735] add@/module/firmware_class
> UDEV [1193788238.908371] add@/module/bcm43xx
> UDEV [1193788238.908935] add@/bus/pci/drivers/bcm43xx
>
> kernel is 2.6.18-5-k7
>
> what can i try from here,i dont want to use ndiwrapper.
A backported 2.6.22 kernel for Etch is available from www.backports.org.
The git history of the kernel lists a "Fix for 4311" which was committed
on 2007-02-14 (2.6.18 was released on 2006-09-19):
http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.23.y.git;a=commit;h=740ac4fb08866d702be90f167665d03759bd27d0
Maybe you will have more success with the newer kernel.
--
Regards, | http://users.icfo.es/Florian.Kulzer
Florian |
Reply to: