Re: Configuring onboard intel soundcard: No sound
On Sat, 15 Sep 2007 the mental interface of
Peter Robinson told:
> Hey good folks,
>
> I am trying to get sound running on a computer with an intel board and the
> following parameters:
>
> # lspci | grep -i audio
> 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
> Controller (rev 02)
>
> # cat /proc/asound/cards
> 0 [Intel ]: HDA-Intel - HDA Intel
> HDA Intel at 0x88320000 irq 23
>
> # head -n5 /proc/asound/card0/codec#2
> Codec: SigmaTel STAC9271D
> Address: 2
> Vendor Id: 0x83847627
> Subsystem Id: 0x80862504
> Revision Id: 0x100201
>
> I tried:
> modprobe snd-intel8x0 ; modprobe snd-pcm-oss ; modprobe snd-mixer-oss ;
> modprobe snd-seq-oss
>
> Result: No error message when playing audio but also no sound.
alsaconf is buggy. I prepared a working version for alsa-utils
1.0.14-2 which will come soon. Anyway, on 2.6 Kernels alsaconf isn't
neede. Udev does the job ;)
Try:
# modprobe snd-intel8x0
# mv /var/lib/alsa/asound.state /var/lib/alsa/asound.state.save
# /etc/init.d/alsa-utils start
I suppose "Headphone Jack Sense" and "Line Jack Sense" aren't muted
[0] [1] which will be done by the above mentioned commands.
[0] http://www.thinkwiki.org/wiki/AD1981B
[1] http://alsa.opensrc.org/index.php/FAQ#My_ALSA_modules_seem_to_be_loaded_fine_but_I_hear_no_sound._Why.27s_that.3F
Elimar
--
The path to source is always uphill!
-unknown-
Reply to: