Sarge_2.4.27-3__kernel_panic
Greetings ....
A few days ago I moved a hdd with a Sarge installation
that had run for a little over 3 years in an old Compaq box
to another old HP box because the power supply in the Compaq died
and the HP power supply wouldn't fit the Compaq .... :-)
The Compaq box had a Cyrix processor and I had 2 working kernels
under Sarge and I used the 686 version as the default ....
2.4.27-3-686
2.4.27-3-386
The HP box that the disk is in now has an AMD K6-2 processor
and after the move the 2.4-686 wouldn't boot but the other
2.4-386 would boot and run Sarge OK ....
I installed a K6 kernel and un-installed the 686 kernel
that wouldn't boot ....
sudo apt-get intall kernel-image-2.4.27-3-k6
sudo apt-get --purge remove kernel-image-2.4.27-3-686
Now I can't boot into either the newly installed K6 kernel
or the older 386 version and get the following messages
at boot time from either ....
pivot_root: no such file or directory
/sbin/init: 432 cannot open dev/console no such file
kernel panic: attempted to kill init !
I spent a fair amount of time Google-izing and found
quite a few others that had gotten similar error messages
at boot time but not quite under the same circumstances ....
Most of these were either problems upgrading from 2.4 to 2.6 kernels
or sata drive problems ....
The K6 kernel files all seem to be in place in the /boot dir
and the grub/menu.lst seems to have been updated OK when I
check from a Knoopix CD boot ....
Any clues as to how to repair this problem
would be greatly appreciated ....
--
Stanley C. Kitching
Human Being
Phoenix, Arizona
----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
Reply to: