[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

set up Xserver for etch upgrade


I updated my debian box to the latest stable release which is etch.
And the xserver stop working. I start the machine with a knoppix live
CD version 2.78 runing on 2.4.27 kernel. At start up I see the below
[QUOTE]Mouse is Generic PS/2 Wheel Mouse at /dev/psaux
Soundcard: VIA Technologies|VT8233 [AC97 Audio Controller]
Video is nVidia GeForce 4, using XFree86(nv) Server
Monitor is KTC1700,H;28.0-96.0kHz, V:50.0-75.0Hz
Using Modes "1024x768""800x600""640x400"[/QUOTE]

Wile boot from the hard disk which has upgraded Debian etch and starx
get the below error
[QUOTE]X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux LIJIANG 2.6.8-3-686 #1 Tue Dec 5
21:26:38 UTC 2006 i686
Build Date: 04 April 2007
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 15 16:07:31 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) AIGLX: Screen 0 is not DRI capable
(EE) xf86OpenSerial: Cannot open device /dev/psaux
        No such device.
(EE) Configured Mouse: cannot open input device
(EE) PreInit failed for input device "Configured Mouse"
    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+us" };
    xkb_geometry             { include "pc(pc104)" };
No core pointer

Fatal server error:
failed to initialize core devices
XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.

my xorg.conf file on the hard disk looks like below
Section "Module"
        Load    "bitmap"
        Load    "dbe"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "record"
        Load    "vbe"

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc104"
        Option          "XkbLayout"     "us"

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto"
        Option          "Emulate3Buttons"       "true"
        Option          "Emulate3Buttons"       "70"

Section "Device"
        Identifier      "nVidia Corporation NV18 [GeForce4 MX 440 AGP
        Driver          "nv"
        BusID           "PCI:1:0:0"

Section "Monitor"
        Identifier      "DC F708M"
        Option          "DPMS"
        HorizSync       28-64
        VertRefresh     43-60

Section "Screen"
        Identifier      "Default Screen"
        Device          "nVidia Corporation NV18 [GeForce4 MX 440 AGP
        Monitor         "DC F708M"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "1280x1024" "1024x768" "800x600"
Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"

Section "DRI"
        Mode    0666


Can any of you give me some hint please?

Thanks a lot!


Reply to: