Kernel panic on Unload Xserver-xorg with driver i810
It happens only with AMD64 port, before I was using x86 port and all
work great, I have an EMT64 capable processor and runs debian great,
all services work fine except xserver-xorg with driver i810, let me say
that the error is just when unloading X, before that I can reach my
desktop, use the Render, 3D accel, Composite Extension, Compiz etc but
when Shuts down the Computer I get a Kernel Panic, I think to set the
driver to VESA and work but haven´t DRI, 3D Accel, Composite etc.
My Hardware is:
- Celeron D 3.6 GHz EMT64
- ASRock 775i65G
- Intel® 865G Chipset
-
Integrated Intel® Extreme Graphics 2 (intel 82865G Graphics)
The error screen message wite some like:
********************CODE**********************
[<ffffffff8004cf10>] thread_return+0x0/0xe7
[<ffffffff8004cf10>] vsf_write+0xe1/0x174
[<ffffffff8004cf10>] sys_write+0x45/0x6e
[<ffffffff8004cf10>] system_call+0x7e/0x83
Code: 4c 8b 20 48 89 c7 c4 89 63 40 ff 50 08 48 89 e8 89 ea 48 ff
RIP [ffffffff8028e424] __rcu_process_callbacks+0x115/0x1a8
RSP <ffffffff8004cf10>
CR2: ffffffff80a324c0
<0> Kernel Panic - not syncing: Aiee, killing interrupt handler!
********************END OF CODE**********************
I have put the one screenshoot here
http://bp0.blogger.com/_w833IbeIZhI/RjpWdCwgHwI/AAAAAAAAAA4/h4-Lba1UnCU/s1600-h/i810+crash.jpg
My xorg.conf is:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
EndSection
Section "Device"
Identifier "Intel Corporation 82945G/GZ Integrated Graphics Controller"
Driver "vesa" #"i810" # I have to comment i810 to avoid crash...
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "DELL E176FP"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation 82945G/GZ Integrated Graphics Controller"
Monitor "DELL E176FP"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection
Please say me what can do to set the correct driver
Thanks for your Help
Reply to: