Insane numbers in SMART report
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Sorry for being little off-topic, but I am really clueless on where else
I could ask.
I just installed "smartmontools" on this brand new laptop with SATA HDD,
and the numbers I am seing are a bit scary. This is what I am talking
about...
1 Raw_Read_Error_Rate ... 90912
2 Throughput_Performance ... 22348118
5 Reallocated_Sector_Ct ... 8589934592000
7 Seek_Error_Rate ... 1559
196 Reallocated_Event_Count ... 458686464
195 Hardware_ECC_Recovered ... 281
203 Run_Out_Cancel ... 433781670603
...full output attached.
195 and 203 are sometimes increasing, and sometimes decreasing, 5 and
196 seem to be stable.
This just does not make any sense. Hard drive cannot be _that_ broken
and still operational, can it? I ran the "long" and "offline" tests, and
there does not seem to be any errors in the logs.
What is going on?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFGIWh0ztOe9mov/y4RAoHcAJ9epeQ506pJPrzO45z6eoNiGu6rjgCggTAW
92V9qSbokx5gEm9f4evJ4lY=
=ad9S
-----END PGP SIGNATURE-----
smartctl version 5.37 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MHV series
Device Model: FUJITSU MHV2080BH PL
Serial Number: NW9ZT723SMVU
Firmware Version: 892C
User Capacity: 80.026.361.856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a
Local Time is: Sun Apr 15 02:23:42 2007 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 471) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 55) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 90912
2 Throughput_Performance 0x0005 100 100 030 Pre-fail Offline - 22348118
3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 91
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8589934592000
7 Seek_Error_Rate 0x000f 100 100 047 Pre-fail Always - 1559
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 4
9 Power_On_Seconds 0x0032 100 100 000 Old_age Always - 0h+02m+08s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 33
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 3181
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 39 (Lifetime Min/Max 17/44)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 281
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 458686464
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000f 100 100 060 Pre-fail Always - 17529
203 Run_Out_Cancel 0x0002 100 100 000 Old_age Always - 433781670603
240 Head_Flying_Hours 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 128 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: