Re: setting-up a dmz

[mess-mate <mess-mate@wanadoo.fr>]

Franck Joncourt <joncourt_franck@yahoo.co.uk> wrote:
...snip...
| 
| To me, it looks like a driver probleme as you mentionned above about the
| message you got at boot time.
| 
After changed the order of the cards, the 3com card and the others
woks perfectly. So it's not the card nor the driver.
It's always eth2 who's i can't get up ! what card it is.
an lspci extract :
00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M
[Tornado] (rev 74)
00:0b.0 Ethernet controller: Accton Technology Corporation
SMC2-1211TX (rev 10)
00:0f.0 Ethernet controller: VIA Technologies, Inc. VT86C100A
[Rhine] (rev 06)
An lsmod:
mii                     5536  3 via_rhine,8139too,3c59x
( correct drivers loaded)
A cat /proc/interrupts:
  0:    1264052    XT-PIC-XT        timer
  1:       1135    XT-PIC-XT        i8042
  2:          0    XT-PIC-XT        cascade
  9:          0    XT-PIC-XT        uhci_hcd:usb1
 10:          0    XT-PIC-XT        eth1
 11:       1613    XT-PIC-XT        eth0
 14:       2288    XT-PIC-XT        ide0
 15:        109    XT-PIC-XT        ide1
( eth2 isn't there ?? )
Extract from dmesg :
eth2: VIA Rhine at 0x1ec00, 00:80:c8:ec:92:b5, IRQ 12.
eth2: MII PHY found at address 8, status 0x7809 advertising 05e1
Link 0000.

Any hint would be CERY welcome.
best regards
mess-mate                               
-- 

You will be called upon to help a friend in trouble.