Re: DELL 2407WFP build in card reader
when the card reader is NOT connected, the output of lsusb is:
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 002: ID 03f0:6204 Hewlett-Packard DeskJet 5150c
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
when I connect the card reader, the output of lsusb is:
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 002: ID 03f0:6204 Hewlett-Packard DeskJet 5150c
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 006: ID 0424:2228 Standard Microsystems Corp.
Bus 001 Device 005: ID 0424:2602 Standard Microsystems Corp.
Bus 001 Device 004: ID 0424:2502 Standard Microsystems Corp.
Bus 001 Device 001: ID 0000:0000
On 2/23/07, Andrew Perrin <clists@perrin.socsci.unc.edu> wrote:
What's the output from lsusb ?
----------------------------------------------------------------------
Andrew J Perrin - andrew_perrin (at) unc.edu - http://perrin.socsci.unc.edu
Assistant Professor of Sociology; Book Review Editor, _Social Forces_
University of North Carolina - CB#3210, Chapel Hill, NC 27599-3210 USA
New Book: http://www.press.uchicago.edu/cgi-bin/hfs.cgi/00/178592.ctl
On Fri, 23 Feb 2007, Joachim Gottschalk wrote:
> Hi everybody,
> I have a DELL LCD monitor (UltraSharp 2407WFP) and it has a 9-in1 build in
> card reader, connected over USB. I wonder, if there is any chance to make
> this card reader work under linux. I tried to compile a kernel with USB and
> MMC support, but my linux still can not detect it. Does anybody have any
> idea?
>
> thanks
>
Reply to: