[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Missing devices on raid1 setup

On Wednesday 21 February 2007 07:32, martin f krafft wrote:
> also sprach José Pablo Fernández <pablo.fernandez@rs.com.ar> 
[2007.02.21.0515 +0100]:
> > ARRAY /dev/md2 level=raid1 num-devices=2 UUID=[...]
> >    devices=/dev/sda3,/dev/sdb3
> > ARRAY /dev/md0 level=raid1 num-devices=2 UUID=[...]
> >    devices=/dev/sda1
> > ARRAY /dev/md1 level=raid1 num-devices=2 UUID=[...]
> >    devices=/dev/sda2
> I would just remove the devices= lines. Does that fix it?

Those lines are the output of a command, mdadm --detail --scan. The other set 
of similar lines which are the config in /etc/mdadm/mdadm.conf are the only 
ones I could really modify, but then, what good would it do? Removing that 
line would make my md2 device not work and would not have any effect on md0 
(which in where the config file is) and probably wouldn't have any effect on 
If there's a good reason why this might work I'll give it a try though.
Thank you.
José Pablo Fernández

Reply to: