Etch Netboot Installation -- Can't Find pxelinux.cfg/default
I'm trying the Etch netboot installation, but the client can't seem
to find the configuration file. I untarred netboot.tar.gz into
/var/lib/tftpboot. I tried copying (and and also moving)
pxelinux.cfg/default to pxelinux.cgf/01-<my client's MAC>,
but that didn't change anything.
I'll now list the PXE messages given on screen by the client. This is
copied by hand, so hopefully I transcribed this right:
PXELINUX 3.31Debian-2006-09-09 Copyright (C) 1994-2005 H. Peter Anvin
UNDI data segment at: 00097F30
UNDI data segment size: 0F80
UNDI code segment at: 00098EB0
UNDI code segment size: 5E61
PXE entry point found (we hope) at 98EB:0E57
My IP address seems to be C0A801DC 192.168.1.220
ip=192.168.1.220.0.0.0.0:192.168.1.1:255.255.255.0
TFTP prefix: /
Trying to load: pxelinux.cfg/01-00-30-1b-80-0b-1c
Trying to load: pxelinux.cfg/C0A801DC
Trying to load: pxelinux.cfg/C0A801D
Trying to load: pxelinux.cfg/C0A801
Trying to load: pxelinux.cfg/C0A80
Trying to load: pxelinux.cfg/C0A8
Trying to load: pxelinux.cfg/C0A
Trying to load: pxelinux.cfg/C0
Trying to load: pxelinux.cfg/C
Trying to load: pxelinux.cfg/default
Unable to locate configuration file
Reply to: