k3b + wodim fails to burn
Hi!
I just upgraded and have these packages installed:
Package: wodim
Architecture: i386
Source: cdrkit
Version: 9:1.1.0-1
Package: k3b
Architecture: i386
Version: 0.12.17-5
When I try to burn data-cd using k3b it fails with the following error:
================================================================================
[BLAH BLAH BLAH...]
Starting to write CD/DVD at speed 10.
0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01: 0 of 666 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 200s
/usr/bin/X11/wodim: A write error occured.
/usr/bin/X11/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 38.150s
Average write speed 119.4x.
Fixating...
Fixating time: 0.004s
cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=1,0,0 speed=10 -dao driveropts=burnfree -eject -overburn -data -tsize=341118s -
mkisofs
-----------------------
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
341118
Warning: creating filesystem that does not conform to ISO-9660.
Warning: ISO-9660 filenames longer than 31 may cause buffer overflows in the OS.
I: -input-charset not specified, using utf-8 (detected in locale settings)
0.15% done, estimate finish Fri Dec 22 15:27:27 2006
0.29% done, estimate finish Fri Dec 22 15:21:53 2006
0.44% done, estimate finish Fri Dec 22 15:19:58 2006
0.59% done, estimate finish Fri Dec 22 15:19:02 2006
mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -gui -graft-points -volid label -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-username/k3b5OEJwb.tmp -rational-rock -hide-list /tmp/kde-username/k3bypiyec.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-username/k3bZrqy7a.tmp -untranslated-filenames -max-iso9660-filenames -iso-level 3 -path-list /tmp/kde-username/k3bnL9xYb.tmp
================================================================================
What seems strange to me is that I tried creating only the iso image with k3b, then burnt the cd using:
dd if=/tmp/k3b_image.iso | cdrecord speed=10 dev=/dev/scd0 driveropts=BURNFREE -v -
and it worked perfectly... then I discovered (amazingly enough) that cdrecord is a symlink to wodim...
Any ideas on what's going wrong?
Thanks
Bye!
Reply to: