[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: How to change a gateway?

You could always write a bash script that uses the route command and
executes at startup

On 12/21/06, Emerson Dorow <emerson.dorow@senior.com.br> wrote:


 Hi Bill,

         Look my /etc/network/interfaces:

 # This file describes the network interfaces available on your system
 # and how to activate them. For more information, see interfaces(5).

 # The loopback network interface
 auto lo
 iface lo inet loopback

 # This is a list of hotpluggable network interfaces.
 # They will be activated automatically by the hotplug subsystem.
 mapping hotplug
         script grep
         map eth0

 # The primary network interface
 auto eth0
 iface eth0 inet static
         address 10.0.10.10
         netmask 255.255.0.0
         broadcast 10.0.255.255
         network 10.0.0.0
         gateway 10.0.10.6

 Put the gateway option in yours interfaces configuration script, now your
route will survive a reboot. I wish i could help you.

 Bye.



 Em Qui, 2006-12-21 às 03:42 -0800, Bill escreveu:


 Hi folks,

 What is the best way to change the IP address of a gateway?
 Other than using the route command - that won't survive a reboot.

 I have a new router with a different IP and need to configure
 accordingly.

 I find the basic data is in /etc/network/interfaces, but it's a
 "no-edit" file. Presumably there's a better way? A tool, a script?
 Any other files involved?

         thanks,

         b.


 --
 To UNSUBSCRIBE, email to
debian-user-REQUEST@lists.debian.org
 with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org



--
With Regards Ali Jawad
Reply to: