Re: snmpwalk to remote address gives timeout

[Fabrice LORRAIN <debfab@free.fr>]

Bart wrote:
> Fabrice LORRAIN schreef:
...
> > > However if I run "snmpwalk -v 1 -c public 192.168.1.36 system" on the
> > > stable box, with 192.168.1.36 the IP address of the testing box, i get:
> > > Timeout: No Response from 192.168.1.36
> > >
> > > snmpd is up and running, I can ping both ways, there are no firewalls
> > > in place. What could be wrong?
> > Is snmpd listening on your interfaces ?
> >
> > Check with "sudo netstat -natup | grep 161" on the sarge box.
> >
> > @+,
> > 	Fab
>
> On Sarge I have:
> netstat -natup | grep 161
> udp        0      0 0.0.0.0:161             0.0.0.0:*
>        707/snmpd
> But Sarge is looking for snmp info on Etch. So for the fun of it, on
> Etch it is:
> netstat -natup | grep 161
> udp        0      0 127.0.0.1:161           0.0.0.0:*
>        1636/snmpd

snmpd is only binded to your localhost interface (127.0.0.1:161) on this 
box. Check your conf. to have it listening on the 192.168.1.36 one.

@+,
	Fab