Pinnacle DC10 card on sid
Hi,
I'm trying to configure a Pinnacle DC10 av/dv card on a Sid box.
The card has two RCA plugs, for input and output, and two s-video plugs.
It also has a firewire port.
The card's firewire port gets set up automatically without much trouble.
(Well, I can only seem to import raw video as root, but that's a
relatively minor issue, I guess.) However, I can't get the
analog-to-digital part working.
As far as I can tell, the a-to-d bit needs the zoran driver [1], which
is included in the 2.6.16 kernel I'm running.
If I say:
modprobe zr36067
I get:
FATAL: Error inserting zr36067
(/lib/modules/2.6.15-1-686/kernel/drivers/media/video/zr36067.ko): No
such device
I get the same even if I play with the card=X options on the kernel
module.
In dmesg I get:
Zoran MJPEG board driver version 0.9.5
No known MJPEG cards found.
I'm actually not 100% convinced that the card actually has a Zoran chip
on it--there are chips with "Pinnacle" printed on them, but no "Zoran".
Here is what I get whan I say lspci:
> 0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 04)
> 0000:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 04)
> 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
> 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
> 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
> 0000:00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03)
> 0000:00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03)
> 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
> 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
> 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
> 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
> 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
> 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
> 0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
> 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03)
> 0000:00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
> 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
> 0000:05:01.0 Multimedia controller: Pinnacle Systems Inc.: Unknown device bede
> 0000:05:01.1 FireWire (IEEE 1394): Pinnacle Systems Inc.: Unknown device 0015
> 0000:05:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller (rev 01)
In the driver documentation it says to make sure the card is not sharing
an interrupt with anything else. If I say lspci -v, it says that the
first Pinnacle device listed uses IRQ 11, and that the VGA controller
also uses IRQ 11. (However, if I say cat /proc/interrupts, I don't see
anything at all for IRQ 11.)
Anyway, I would try changing the card's interrupt, to see if that works,
but I don't know how. I already tried moving it to the other PCI slot.
Any ideas?
Many thanks in advance,
Andrew
[1] http://linuxtv.org/v4lwiki/index.php/Zoran_devices_%28zr36057%
2C_zr36067%29
__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis!
Regístrate ya - http://correo.yahoo.com.mx/
Reply to: