Re: Pinnacle PCTV Pro card

[Benjamí Villoslada <benjami@gmail.com>]

A Dissabte 29 Abril 2006 18:52, Andrew Sackville-West va escriure:
> > Maybe changing ACPI?  Howto?  Thanks :)
>
> good catch. try a booting with
>
> ACPI=off

Thanks :)

Seems that I have fewer errors with bt878:

[dmesg for bt878]
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878_probe: card id=[0x1211bd], Unknown card.
Exiting..
bt878: probe of 0000:05:02.1 failed with error -22

But doesn't works too :(  

Maybe the cardid?  The card parameter is correct (card=39) and for the bttv 
module.

[dmesg complete]
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 177, latency: 64, mmio: 0xf0001000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp3400 1-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
msp3400 1-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and 
autoselect
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tda9887 1-004b: chip found @ 0x96 (bt878 #0 [sw])
tuner 1-0060: Chip ID is not zero. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 1-0060: microtune: companycode=3cbf part=42 rev=94
tuner 1-0060: microtune MT2050 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
bt878_probe: card id=[0x1211bd], Unknown card.
Exiting..



-- 
Benjamí
http://blog.bitassa.cat



.