On Wed, 2006-04-05 at 21:57 -0700, Account for Debian group mail wrote: > Is there a way to configure ntpd to listen to a select number of > interfaces? I have it set up on a virtual server and the ntpd program has > attached itself to hundreds of interfaces. If you were to look at the ntp-docs that are in /usr/share/doc/ntp-docs/html/ Specifically: file:///usr/share/doc/ntp-doc/html/ntpd.html about 2/3rds of the way down the file. You will find a section called: Command Line Options In there you will find the "-L" option. -L Do not listen to virtual IPs. The default is to listen. So if you are using Debian Sarge (I assume), to the file /etc/init.d/ntp-server change the following partial line: /usr/sbin/ntpd -- -p /var/run/ntpd.pid -u $UGID to this /usr/sbin/ntpd -- -p /var/run/ntpd.pid -L -u $UGID adding the -L will make ntpd not listen on Virtual IPs. Hope this Helps. Sorry if you are subscribed to Debian-User, I haven't seen you on here before. -- greg, firstname.lastname@example.org The technology that is Stronger, Better, Faster: Linux Use Debian GNU/Linux, its a bazaar thing NOTICE: Due to Presidential Executive Orders, the National Security Agency may have read this email without warning, warrant, or notice, and certainly without probable cause. They may do this without any judicial or legislative oversight. You have no recourse nor protection.
Description: This is a digitally signed message part