cannot mount cdrom/dvd drive
I've managed to get Debian 2.6 installed on my system using a Pioneer DVD/CD-ROM Drive. After the install I wanted to use the DVD/CD as a source and found that the system does not recognize the drive. I also have a SATA drive 200GB installed. Seems that the 2.6 kernel treats the SATA as a sda1-4 but does ot see the IDE DVD/CD Rom. Can someone point me in the right direction to getting this fixed.
dmesg:
SCSI subsystem initialized
libata version 1.02 loaded.
ata_piix version 1.02
ata_piix: combined mode detected
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3e01 87:4023 88:207f
ata1: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : ata_piix
Using anticipatory io scheduler
Vendor: ATA Model: WDC WD2000JS-19M Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
ata2: dev 0 cfg 49:0f00 82:0218 83:4000 84:4000 85:0218 86:0000 87:4000 88:0407
ata2: dev 0 ATAPI, max UDMA/33
ata2: dev 0 configured for UDMA/33
scsi1 : ata_piix
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
System Stats:
Intel P4 HyperThreading CPU 3.0
BioStar M/B P4ST4
1.2GB DDR memory
WD200 SATA2 HDD
Intel Pro/1000 NIC
The SATA drive is set combined (giving access to both SATA and PATA drives).
Thanks
Reply to: