udev 0.070-2 + DVB tv tuner card for mythtv

[Grant X <gkx.nnt@gmail.com>]

Hi,

I'm running Debian unstable and I'm trying to set up MythTV to use my
Twinhan VisionPlus DVB card. The card gets detected at boot time with
no problems, and the appropriate modules are loaded, but udev
(0.070-2) never creates any nodes in /dev for it.

The udev.rules file contains a match entry for 'KERNEL=="dvb*"', so I
added a catch-all entry that matches 'KERNEL=="*"', and outputs the
kernel device name to a file. Nowhere was there any dvb entries,
despite the dmesg output showing something about "dvb0"

Since my end goal is to get the card working under mythtv (which
expects the device to be under /dev/dvb/adapter*), and all the
documentation I see points to the fact that udev should magically
create all this, does anyone have any ideas as to how I can proceed?

Thanks,
-Grant

## dmesg excerpt:
agpgart: Detected VIA KT266/KY266x/KT333 chipset
agpgart: AGP aperture is 32M @ 0xe8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 5 (level,
low) -> IRQ 5
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 5, latency: 32, mmio: 0xed004000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID
is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f100fe [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:00:0a.1[A] -> Link [LNKC] -> GSI 5 (level,
low) -> IRQ 5
bt878(0): Bt878 (rev 17) at 00:0a.1, irq: 5, latency: 32, memory: 0xed005000
btaudio: driver version 0.7 loaded [digital+analog]
usbcore: registered new driver usbfs
usbcore: registered new driver hub

## dvb files that I assume are created by the /sbin/MAKEDEV script
## (I have no idea if this affects anything)
kenshi:~# find /dev -name "*dvb*"
/dev/.static/dev/dvb
kenshi:~# ls /dev/.static/dev/dvb
adapter0  adapter1  adapter2  adapter3
kenshi:~# ls /dev/.static/dev/dvb/adapter0
audio0  ca0  demux0  dvr0  frontend0  net0  osd0  video0