HELP - is SMP enabled???????
Hi I am a real newbie to linux and would really appreciate some help. I
am trying to enable SMP on a digital 3100. Debian was the only linux I
tried that would install and reboot with no problems. Below is my dmesg
output. It implies that SMP is loaded, and has found 2 CPU's. When i
run "cat /proc/cpuinfo", it only lists 1 cpu (CPU#0). System monitor in
X only shows 1 CPU as well. In dmesg below, it appears that only 1 CPU
is initialised (Initializing CPU#0).
So..... Am I using 2 CPU's, if so how can you tell, and if not, can you
tell me what I need to do???
Linux version 2.4.27-2-386 (horms@tabatha.lab.ultramonkey.org) (gcc
version 3.3.5 (Debian 1:3.3.5-12)) #1 Mon May 16 16:47:51 JST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f29a0 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff29a0 - 0000000100000000 (reserved)
512MB LOWMEM available.
found SMP MP-table at 000fdcd0
hm, page 000fd000 reserved twice.
hm, page 000fe000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 131072
zone(0): 4096 pages.
zone(1): 126976 pages.
zone(2): 0 pages.
DMI not present.
ACPI: Unable to locate RSDP
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: INTEL Product ID: 440FX APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
Processor #1 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Kernel command line: root=/dev/rd/c0d0p1 ro
Initializing CPU#0
Detected 299.155 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 596.37 BogoMIPS
Memory: 512636k/524288k available (1069k kernel code, 11264k reserved,
459k data, 96k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After generic, caps: 0080fbff 00000000 00000000 00000000
CPU: Common caps: 0080fbff 00000000 00000000 00000000
CPU: Intel Pentium II (Klamath) stepping 04
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 16.
number of IO-APIC #2 registers: 16.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 000F0011
....... : max redirection entries: 000F
....... : PRQ implemented: 0
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 0 0 0 0 1 1 71
0a 001 01 1 1 0 0 0 1 1 79
0b 001 01 1 1 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 1 1 0 0 0 1 1 99
0f 001 01 1 1 0 0 0 1 1 A1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 299.1523 MHz.
..... host bus clock speed is 66.4780 MHz.
cpu: 0, clocks: 664780, slice: 332390
CPU0<T0:664768,T1:332368,D:10,S:332390,C:664780>
ACPI: Subsystem revision 20040326
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xf79be, last bus=0
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Limiting direct PCI/PCI transfers.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS
MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 131072 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 3692 blocks [1 disk] into ram disk...
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
Freeing initrd memory: 3692k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 96k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
DAC960: ***** DAC960 RAID Driver Version 2.4.11 of 11 October 2001
*****
DAC960: Copyright 1998-2001 by Leonard N. Zubkoff <lnz@dandelion.com>
DAC960#0: Configuring Mylex DAC960PU PCI RAID Controller
DAC960#0: Firmware Version: 3.52-0-02, Channels: 3, Memory Size: 4MB
DAC960#0: PCI Bus: 0, Device: 9, Function: 0, I/O Address: 0x7880
DAC960#0: PCI Address: 0xFEBEF800 mapped at 0xE0823800, IRQ Channel:
14
DAC960#0: Controller Queue Depth: 64, Maximum Blocks per Command: 128
DAC960#0: Driver Queue Depth: 63, Scatter/Gather Limit: 17 of 17
Segments
DAC960#0: Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 128/32
DAC960#0: Physical Devices:
DAC960#0: 0:0 Vendor: COMPAQ Model: BB01811C9C Revision:
3BS8
DAC960#0: Serial Number: 3AK0K95J0000V02803HV
DAC960#0: Disk Status: Online, 35563520 blocks
DAC960#0: 0:1 Vendor: COMPAQ Model: BB01811C9C Revision:
3B05
DAC960#0: Serial Number: 3AK06LLJ000079510L6F
DAC960#0: Disk Status: Online, 35563520 blocks
DAC960#0: 0:2 Vendor: COMPAQ Model: BB01811C9C Revision:
3B05
DAC960#0: Serial Number: 3AK06XNB00007001HG74
DAC960#0: Disk Status: Online, 35563520 blocks
DAC960#0: 0:3 Vendor: COMPAQ Model: BB01811C9C Revision:
3B05
DAC960#0: Serial Number: 3AK071VP00001001JEU1
DAC960#0: Disk Status: Online, 35563520 blocks
DAC960#0: Logical Drives:
DAC960#0: /dev/rd/c0d0: RAID-5, Online, 106690560 blocks, Write
Thru
Partition check:
rd/c0d0: p1 p2 < p5 >
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding Swap: 1542200k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on dac960(48,1), internal journal
Real Time Clock Driver v1.10f
SCSI subsystem driver Revision: 1.00
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec aic7880 Ultra SCSI adapter>
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
(scsi0:A:5): 5.000MB/s transfers (5.000MHz, offset 15)
Vendor: DEC Model: DLT2000 Rev: 830A
Type: Sequential-Access ANSI SCSI revision: 02
(scsi0:A:6): 10.000MB/s transfers (10.000MHz, offset 8)
Vendor: TOSHIBA Model: CD-ROM XM-5701TA Rev: 0557
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY
(2) block.
tulip0: Index #1 - Media 10baseT-FDX (#4) described by a 21142 Serial
PHY (2) block.
tulip0: Index #2 - Media 100baseTx (#3) described by a 21143 SYM PHY
(4) block.
tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21143 SYM
PHY (4) block.
eth0: Digital DS21143 Tulip rev 48 at 0x7800, 00:00:F8:09:5F:02, IRQ
15.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver v1.1
usb-uhci.c: $Revision: 1.275 $ time 16:52:03 May 16 2005
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
NET4: AppleTalk 0.18a for Linux NET4.0
lp0: using parport0 (polling).
apm: BIOS not found.
[drm] Initialized radeon 1.7.0 20020828 on minor 0
Reply to: