[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: USB flash drive problem



On 12/23/05, Rodney D. Myers <rdmyers.42@gmail.com> wrote:
> On Fri, 23 Dec 2005 13:52:28 -0600
> Tatsuya Kobayashi <pikopiko28@gmail.com> wrote:
>
> > I have tried to access with /dev/sdd and /dev/sdd1 but I couldn't
> >  access. When I could access to this USB flash drive on the kernel
> > 2.4, I saw on the /dev/sde and partition was /dev/sde1.
> >
> > Actually, that log was taken when USB drive was connected during boot
> > process. The log I posted below is taken when I rebooted without USB
> > drive.
>
> Plug the memory card in, and then in a shell type dmesg. This will tell
> you what debian sees being inserted. Different cards are going to be
> different /dev/sda /dev/sde, etc
>
> --
> Rodney D. Myers <rdmyers.42@gmail.com>
> Registered Linux User #96112
> ICQ#:     AIM#:       YAHOO:
> 18002350  mailman452  mailman42_5
>
> They that can give up essential liberty to obtain a
> little temporary safety deserve neither liberty nor safety.
>         Ben Franklin - 1759

After I inserted CF on the multi card reader, dmesg gave this log.

SCSI device sdb: 62592 512-byte hdwr sectors (32 MB)
sdb: assuming Write Enabled
sdb: assuming drive cache: write through
SCSI device sdb: 62592 512-byte hdwr sectors (32 MB)
sdb: assuming Write Enabled
sdb: assuming drive cache: write through
 /dev/scsi/host0/bus0/target0/lun1: p1

And also CF was mounted on /media/CANON_DC. Still my USB drive won't
be recognized and I see no logs.

I don't have any other media such as memory stick or SD card so I can't
try to see what's going to happen with other type of media.


Tatsuya Kobayashi



Reply to: