"H.S." <hs.samix@gmail.com> wrote:
Fred J. wrote:
> Hello
>
> I have the current set up and need to get my firewall "posted below"
> running, it is not running because of the output of the #route command
> below not showing any of its rules.
What does "iptables -nvL" command give?
->HS
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
# iptables -nvL
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source
destination
8 560 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0
0 0 LOG all -- !lo * 127.0.0.0/8 0.0.0.0/0 LOG flags 0 level 4
0 0 DROP all -- !lo * 127.0.0.0/8
0.0.0.0/0
0 0 ACCEPT all -- eth0 * 0.0.0.0/0 255.255.255.255
0 0 ACCEPT all -- eth1 * 0.0.0.0/0 255.255.255.255
0 0 ACCEPT all -- eth0 * 0.0.0.0/0 192.168.1.101
0 0 ACCEPT all
-- eth0 * 0.0.0.0/0 192.168.1.255
649 578K ACCEPT all -- eth1 * 0.0.0.0/0 192.168.1.100
0 0 ACCEPT all -- eth1 * 0.0.0.0/0 192.168.1.255
0 0 LOG all -- * * 0.0.0.0/0
0.0.0.0/0 LOG flags 0 level 4
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
Chain FORWARD (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 LOG all -- * *
0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0
Chain OUTPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
8 560 ACCEPT all -- * lo
0.0.0.0/0 0.0.0.0/0
0 0 ACCEPT all -- * eth0 0.0.0.0/0 255.255.255.255
0 0 ACCEPT all -- * eth1 0.0.0.0/0 255.255.255.255
0 0 ACCEPT all -- * eth0 192.168.1.101 0.0.0.0/0
0 0 ACCEPT all -- * eth0 192.168.1.255 0.0.0.0/0
668 111K ACCEPT all -- * eth1 192.168.1.100 0.0.0.0/0
0 0 ACCEPT all -- * eth1 192.168.1.255 0.0.0.0/0
0 0 LOG all -- *
* 0.0.0.0/0 0.0.0.0/0 LOG flags 0 level 4
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0