net configure
I have asus A7N8X deluxe Mother board with 3com and forcedeth ethernet
ports. nvidia forcedeth is eth0 and 3com is eth1. I have crossover
cable connected to eth1(3com). I have both debian and knoppix along
with winxp. When the pc is connected to laptop through eth1, it works
in winxp and knoppix. but not in debian.
/etc/network/interfaces is same in both knoppix and debian installation.
lvghomepc:~# cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
# automatically added when upgrading
auto lo eth1 eth0
iface lo inet loopback
iface eth1 inet static
address 192.168.0.1
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
iface eth0 inet static
address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
ifconfig debian
lvghomepc:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0C:6E:67:79:8A
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::20c:6eff:fe67:798a/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:177 Base address:0x2000
eth1 Link encap:UNSPEC HWaddr 00-E0-18-00-00-23-C1-AD-00-00-00-00-00-00-00-00
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:76 errors:0 dropped:0 overruns:0 frame:0
TX packets:76 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4912 (4.7 KiB) TX bytes:4912 (4.7 KiB)
ifconfig knoppix
root@lvghomepc:~# ifconfig
eth0 Link encap:UNSPEC HWaddr 00-E0-18-00-00-23-C1-AD-00-00-00-00-00-00-00-00
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
eth1 Link encap:Ethernet HWaddr 00:26:54:0E:8E:C0
inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:60 (60.0 b)
Interrupt:22 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:300 (300.0 b) TX bytes:300 (300.0 b)
why results are different?
what is the significance of Link encap:UNSPEC HWaddr 00-E0-18-00-00-23-C1-AD-00-00-00-00-00-00-00-00?
How to get results same as knoppix in debian?
--
L.V.Gandhi
http://lvgandhi.tripod.com/
linux user No.205042
Reply to: