Re: how to reconstruct MD RAID device?
Clive Menzies --> debian-user (2005-08-24 14:22:39 +0100):
> On (24/08/05 14:45), Jukka Salmi wrote:
> > a Debian 3.1 system which uses md devices for all its file systems and
> > swap was reset by a power failure. On startup, the root file systems
> > md device failed to configure and is in degraded mode now. I think the
> > failed device is probably fine, but md configuration failed due to
> > parity errors or similar. After skimming through mdadm(8)'s man page
> > I still can't figure out what I need to do now, so help is appreciated.
>
> What is the output of:
>
> $ cat /proc/mdstat
Sorry, I forgot to add that...
$ cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 hda1[0] hdb1[1]
62400 blocks [2/2] [UU]
md2 : active raid1 hda3[0]
39107264 blocks [2/1] [U_]
md1 : active raid1 hda2[0] hdb2[1]
976640 blocks [2/2] [UU]
unused devices: <none>
Regards, Jukka
--
bashian roulette:
$ ((RANDOM%6)) || rm -rf ~
Reply to: