cant connect to port 80
Hi list
I have my routing rules as so
/sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114 table IS
/sbin/ip route add default via 196.36.10.113 table IS
/sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100 table TELKOM
/sbin/ip route add default via 192.168.10.200 table TELKOM
/sbin/ip route add 196.36.10.113 dev eth0 src 196.36.10.114
/sbin/ip route add 192.168.10.200 dev eth2 src 192.168.10.100
/sbin/ip route add default via 196.36.10.113
/sbin/ip rule add from 196.36.10.114 table IS
/sbin/ip rule add from 192.168.10.100 table TELKOM
/sbin/ip rule add fwmark 1 table TELKOM
apart from the rest of my firewall ruleset
I have an entry as :
$IPT -t nat -A PREROUTING -i eth1 -t mangle -p tcp --dport 80 -j MARK --set-mark 1
$IPT -t filter -A FORWARD -i eth1 -o eth2 -m multiport -p tcp --dport 80,443 -m state --state NEW -j ACCEPT
My browser cant seem to connect to a webserver.
Probally a routing issue, as I see that I dont get any messages in syslog of FORWARD complaining.
If anyone could help, it would be most appreciated.
Kind Regards
Brent Clark
Reply to: