deskjet 5740: 5 minute pause between jobs
I'm using the hplip driver with cups, and running into an anoying problem.
Something is getting hung at the end of each job.
Here's some data points:
o there's no pause between pages, only a pause between jobs (a multipage job
doesn't hang between pages - only after the last page)
o the power light on the printer flashes after the last page, and during the
5 minute pause
o hitting the cancel button on the printer stops the power light flashing,
but jobs are still hung for 5 minutes
When debugging is enabled, here's the log tail when it hangs:
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->header.Duplex = 0
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->page = 1
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd = 0x89fbfb0
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd->flip_duplex = 1
D [20/Jul/2005:10:19:38 -0400] [Job 25] width = 4658, height = 6667
D [20/Jul/2005:10:19:38 -0400] [Job 25] PageSize = [ 595 842 ], HWResolution
= [ 600 600 ]
D [20/Jul/2005:10:19:38 -0400] [Job 25] HWMargins = [ 18.000 36.000 18.000
6.000 ]
D [20/Jul/2005:10:19:38 -0400] [Job 25] matrix = [ 8.333 0.000 0.000 -8.333
-150.000 6966.667 ]
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->header.Duplex = 0
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->page = 1
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd = 0x89fbfb0
D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd->flip_duplex = 1
D [20/Jul/2005:10:19:38 -0400] [Job 25] width = 4658, height = 6667
D [20/Jul/2005:10:19:38 -0400] [Job 25] PageSize = [ 595 842 ], HWResolution
= [ 600 600 ]
--
Tom Vier <tmv@comcast.net>
DSA Key ID 0x15741ECE
Reply to: