X.org, DELL 2001FP LCD monitor and 1600x1200 resolution
I tried to upgrade to X.org, but I can't get the 1600x1200 resolution
with the DELL 2001FP LCD monitor. What should I do?
The log file says:
[...]
(II) I810(0): clock: 162.0 MHz Image Size: 367 x 275 mm
(II) I810(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) I810(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) I810(0): Serial No: <snip>
(II) I810(0): Monitor name: DELL 2001FP
(II) I810(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 80 kHz, PixClock max 160 MHz
(II) I810(0): Using detected DDC timings
(II) I810(0): HorizSync 31-80
(II) I810(0): VertRefresh 56-76
(II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs.
(--) I810(0): Maximum space available for video modes: 12288 kByte
[...]
*(WW) (1600x1200,Dell LCD Monitor) mode clock 204.326MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 204.326MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 204.326MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 204.326MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 195.84MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 195.84MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 195.84MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 190.247MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 190.247MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,Dell LCD Monitor) mode clock 160.833MHz exceeds DDC maximum 160MHz
[...]
(II) I810(0): Dell LCD Monitor: Using hsync range of 31.00-80.00 kHz
(II) I810(0): Dell LCD Monitor: Using vrefresh range of 56.00-76.00 Hz
(II) I810(0): Not using mode "1280x960" (no mode of this name)
(II) I810(0): Not using mode "1152x864" (no mode of this name)
(1600x1200,Dell LCD Monitor) mode clock 162MHz exceeds DDC maximum 160MHz
(1280x960,Dell LCD Monitor) mode clock 100000MHz exceeds DDC maximum 160MHz
(1152x864,Dell LCD Monitor) mode clock 100000MHz exceeds DDC maximum 160MHz
(II) I810(0): 53368 kBytes additional video memory is required to
enable tiling mode for DRI.
(II) I810(0): 8988 kBytes additional video memory is required to enable DRI.
(II) I810(0): Disabling DRI.
(--) I810(0): Virtual size is 1600x1200 (pitch 1600)
(**) I810(0): *Built-in mode "1024x768"
(**) I810(0): *Built-in mode "800x600"
(**) I810(0): *Built-in mode "640x480"
(**) I810(0): Built-in mode "1280x1024"
(II) I810(0): Attempting to use 75Hz refresh for mode "1024x768" (54)
(II) I810(0): Attempting to use 75Hz refresh for mode "800x600" (52)
(II) I810(0): Attempting to use 75Hz refresh for mode "640x480" (50)
(II) I810(0): Attempting to use 75Hz refresh for mode "1280x1024" (58)
(--) I810(0): Display dimensions: (410, 310) mm
(--) I810(0): DPI set to (99, 98)
[...]
I also tried to add a ModeLine as said on
<http://wiki.x.org/wiki/FAQVideoModes>:
Section "Monitor"
Identifier "DELL 2001FP"
Option "DPMS"
ModeLine "1600x1200" 160.00 1600 1664 1856 2160 1200 1201 1204 1250
EndSection
but then I can only get 640x480. The log file says:
[...]
*(WW) (1600x1200,DELL 2001FP) mode clock 195.84MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 195.84MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 195.84MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 190.247MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 190.247MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
(WW) (1600x1200,DELL 2001FP) mode clock 160.833MHz exceeds DDC maximum 160MHz
[...]
(II) I810(0): DELL 2001FP: Using default hsync range of 31.00-80.00 kHz
(II) I810(0): DELL 2001FP: Using default vrefresh range of 56.00-76.00 Hz
(II) I810(0): Not using mode "1600x1200" (no mode of this name)
(II) I810(0): Not using mode "1280x960" (no mode of this name)
(II) I810(0): Not using mode "1152x864" (no mode of this name)
(II) I810(0): Not using mode "1024x768" (no mode of this name)
(II) I810(0): Not using mode "800x600" (no mode of this name)
(1600x1200,DELL 2001FP) mode clock 100000MHz exceeds DDC maximum 160MHz
(1280x960,DELL 2001FP) mode clock 100000MHz exceeds DDC maximum 160MHz
(1152x864,DELL 2001FP) mode clock 100000MHz exceeds DDC maximum 160MHz
(1024x768,DELL 2001FP) mode clock 100000MHz exceeds DDC maximum 160MHz
(800x600,DELL 2001FP) mode clock 100000MHz exceeds DDC maximum 160MHz
(II) I810(0): Increasing the scanline pitch to allow tiling mode (640 -> 1024).
(--) I810(0): Virtual size is 640x480 (pitch 1024)
(**) I810(0): *Built-in mode "640x480"
(II) I810(0): Attempting to use 60Hz refresh for mode "640x480" (50)
(--) I810(0): Display dimensions: (410, 310) mm
(--) I810(0): DPI set to (39, 39)
[...]
--
Vincent Lefèvre <vincent@vinc17.org> - Web: <http://www.vinc17.org/>
100% accessible validated (X)HTML - Blog: <http://www.vinc17.org/blog/>
Work: CR INRIA - computer arithmetic / SPACES project at LORIA
Reply to: