Hi all,
any one could shed some light here thanks in advance. I'm trying to
understand why my SMC Barricade DHCP Client Log never see my Debian's
Machine name but XP ones...
Using customized Kernel 2.6.8-15 machine on a LAN behind a SMC Barricade
74004WBRA , during startup I compared the DHCP sequences content and
find out that Option 12: Host Name = "Always set up with XP" but not
with Debian!
I think that I might have a DHCP issue as I compared the two DHCP
sequences (one with XP from scratch and one with Debian under same
conditions, scratch meant Power ON and Boot)
On XP side just for DHCP the first attempt is the Request with Option
12: Host Name = "Already set up with XP". See details hereafter
extracted from Ethereal Capture
Bootstrap Protocol
Message type: Boot Request (1)
Hardware type: Ethernet
Hardware address length: 6
Hops: 0
Transaction ID: 0x04cba1a1
Seconds elapsed: 0
Bootp flags: 0x0000 (Unicast)
0... .... .... .... = Broadcast flag: Unicast
.000 0000 0000 0000 = Reserved flags: 0x0000
Client IP address: 0.0.0.0 (0.0.0.0)
Your (client) IP address: 0.0.0.0 (0.0.0.0)
Next server IP address: 0.0.0.0 (0.0.0.0)
Relay agent IP address: 0.0.0.0 (0.0.0.0)
Client MAC address: 00:50:70:a4:0c:8a (Chaintec_a4:0c:8a)
Server host name not given
Boot file name not given
Magic cookie: (OK)
Option 53: DHCP Message Type = DHCP Discover
Option 116: DHCP Auto-Configuration (1 bytes)
Option 61: Client identifier
Hardware type: Ethernet
Client MAC address: 00:50:70:a4:0c:8a (Chaintec_a4:0c:8a)
Option 12: Host Name = "Melodie_Nelson"
Option 60: Vendor class identifier = "MSFT 5.0"
Option 55: Parameter Request List
1 = Subnet Mask
15 = Domain Name
3 = Router
6 = Domain Name Server
44 = NetBIOS over TCP/IP Name Server
46 = NetBIOS over TCP/IP Node Type
47 = NetBIOS over TCP/IP Scope
31 = Perform Router Discover
33 = Static Route
Unknown Option Code: 249
43 = Vendor-Specific Information
End Option
Padding
While with Debian this option 12 is empty, see herafter:
Bootstrap Protocol
Message type: Boot Request (1)
Hardware type: Ethernet
Hardware address length: 6
Hops: 0
Transaction ID: 0xc86e1461
Seconds elapsed: 0
Bootp flags: 0x0000 (Unicast)
0... .... .... .... = Broadcast flag: Unicast
.000 0000 0000 0000 = Reserved flags: 0x0000
Client IP address: 0.0.0.0 (0.0.0.0)
Your (client) IP address: 0.0.0.0 (0.0.0.0)
Next server IP address: 0.0.0.0 (0.0.0.0)
Relay agent IP address: 0.0.0.0 (0.0.0.0)
Client MAC address: 00:80:c7:11:94:e3 (Xircom_11:94:e3)
Server host name not given
Boot file name not given
Magic cookie: (OK)
Option 53: DHCP Message Type = DHCP Discover
Option 55: Parameter Request List
1 = Subnet Mask
28 = Broadcast Address
2 = Time Offset
3 = Router
15 = Domain Name
6 = Domain Name Server
12 = Host Name
So within my SMC Barricade DHCP Client Log I never see my Debian's
Machine name...
Any advise?
JL