Dave Ewart wrote:
Good point i've got this with the stock 2.6.10-1-686 kernel.On Wednesday, 06.04.2005 at 12:51 +0200, Marco Calviani wrote:/dev/hda: setting using_dma to 1 (on) HDIO_SET_DMA failed: Operation not permitted using_dma = 0 (off) Maybe i've got some IDE module missing?Assuming this is done as root? If not, you need to do that; if already root, what kernel are you running?Ok, i' root, and i'm using a custom reviewed 2.6.10 kernel.What's a "custom reviewed kernel" mean? How does it vary from the stock Debian kernels? For example, how is its IDE support different? Can you make DMA work by using a stock Debian kernel? Dave. /dev/hda: Timing buffered disk reads: 78 MB in 3.12 seconds = 24.96 MB/sec However i've got this when i do an lsmod: ide_generic 1152 0 [permanent] via82cxxx 13788 0 [permanent] trm290 4196 0 [permanent] triflex 3680 0 [permanent] slc90e66 5856 0 [permanent] sis5513 16392 0 [permanent] siimage 12512 0 [permanent] serverworks 9160 0 [permanent] sc1200 7264 0 [permanent] rz1000 2432 0 [permanent] piix 10116 0 [permanent] pdc202xx_old 11200 0 [permanent] opti621 4580 0 [permanent] ns87415 4200 0 [permanent] hpt366 20128 0 [permanent] ide_disk 21024 6 hpt366 hpt34x 5152 0 [permanent] generic 3904 0 [permanent] cy82c693 4612 0 [permanent] cs5530 5344 0 [permanent] cs5520 4576 0 [permanent] cmd64x 11964 0 [permanent] atiixp 5968 0 [permanent] amd74xx 14172 0 [permanent] alim15x3 12076 0 [permanent] aec62xx 7264 0 [permanent] pdc202xx_new 8928 0 [permanent] ide_core 133036 28 ide_cd,ide_generic,via82cxxx,trm290,triflex,slc90e66,sis5513,siimage,serverworks,sc1200,rz1000,piix,pdc202xx_old,opti621,ns87415,hpt366,ide_disk,hpt34x,generic,cy82c693,cs5530,cs5520,cmd64x,atiixp,amd74xx,alim15x3,aec62xx,pdc202xx_new Which one is the correct module? Regards, MC |