cdrecord not recognizing a pure SCSI cdrw?
Hi all!
After waiting for kernel 2.6.9 to fix my problem with my Adaptec 29160
controller, I have found that now it seems that cdrecord is unable to
recognize my Plextor SCSI burner. I can't understand what is going on or
how to solve it, so any help is appreciated. Here is the output of dmesg
and cdrecord -scanbus:
dmesg:
----------------------------------------------------------------
bound device '0000:00:0c.0' to driver 'aic7xxx'
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
<Adaptec 29160 Ultra160 SCSI adapter>
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
DEV: registering device: ID = 'host0'
PM: Adding info for No Bus:host0
CLASS: registering class device: ID = 'host0'
class_hotplug - name = host0
(scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16)
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
DEV: registering device: ID = '0:0:4:0'
PM: Adding info for scsi:0:0:4:0
bus scsi: add device 0:0:4:0
CLASS: registering class device: ID = '0:0:4:0'
class_hotplug - name = 0:0:4:0
bus scsi: add driver sr
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
bound device '0:0:4:0' to driver 'sr'
cdrom: open failed.
------------------------------------------------------------
Up to here everything seems fine... the following modules are loaded:
sr_mod 15460 0
cdrom 37596 1 sr_mod
aic7xxx 165816 0
scsi_mod 111436 2 sr_mod,aic7xxx
but then, trying to detect the drive:
---------------------------------------------------------------------
root@Alderaan:~#cdrecord -scanbus
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jörg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original
version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this
version.
cdrecord: Warning: Running on Linux-2.6.9
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or
Solaris.
cdrecord: Warning: Linux-2.6.8 introduced incompatible interface
changes.
cdrecord: Warning: SCSI transport does no longer work for suid root
programs.
cdrecord: Warning: if cdrecord fails, try to run it from a root account.
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open
SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord:
cdrecord: For more information, install the cdrtools-doc
cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
-----------------------------------------------------------------------
And I have not managed to make the burner recognized! I can mount CD and
use the drive to read, but no way to make cdrecord work. Any ideas or
hints?
Thanks in advance!
---
,,,
(o o)
--ooO--(_)---Ooo-----------
Yes, they're sharing a drink they call loneliness, but it's better than
drinkin' alone.-Billy Joel
--oo0--------0oo-----------
Reply to: