Re: PPPoE

[Ken Gilmour <ken@playersonly.com>]

Captain's Log, stardate Sat, 18 Dec 2004 16:15:34 +0100, from the fingers of Kim came the words:
> All looks fine and ppp0 has got the right IP. If I run route I get:
>
> Kernel IP routing table
> Destination     Gateway         Genmask         Flags Metric Ref
> Use Iface
> 10.254.0.1      *               255.255.255.255 UH    0      0
>   0 ppp0 192.168.0.0     *               255.255.255.0   U     0
>   0        0 eth0 10.10.0.0       *               255.255.254.0   U
>     0      0        0 eth1 default         10.254.0.1      0.0.0.0
>        UG    0      0        0 ppp0

That routing table is not routing all IP addresses. Just ones in the 10.254.0.0 range

Try these:

route add default gw 10.254.0.1

and / or

route add 0.0.0.0 gw 10.254.0.1