Re: Installing Debian with KT600 motherboard
ons, 10,.11.2004 kl. 17.41 +0100, skrev ViCToRy:
> On Wed, Nov 10, 2004 at 11:14:22AM -0500, Ove Kaaven wrote:
> > Anyway, what I wanted to do what to create sarge netinstall floppies and
> > do a network install over the cable modem. But there's a tiny problem:
> > The kernel on the boot floppies won't recognize the IDE controller. It
> > doesn't seem to think there is one. The only message about IDE in the
> > kernel log is the presumably-normal idebus 33MHz stuff. If I
> > cat /proc/pci, the IDE controller is seen at 0.15.1 (while the SATA RAID
> > controller is 0.15.0), but the kernel doesn't seem to even try to probe
> > it during boot, much less actually find my hard drive. (The BIOS is
> > happy seeing the hard disk though.)
> >
> > Is there anything I can do?
>
> Several BIOS has types modes for PATA and SATA configuration, Can you
> try it with some legacy mode?
Thanks, but unless you're talking about the per-harddisk PIO mode and
UltraDMA enable, then no, this Award BIOS does not have such a setting.
Reply to: