RE: CDRW not working on debian
This may seem too simple but I used xcdroast in X. It found my ATAPI CDRW
drive and gave me the access string which was ATAPI:0,0,0. I was then able
to use that at the command line for cdrecord.
Also, you may want to take a look at
/usr/share/doc/cdrecord/README.ATAPI.setup.
Joe
-----Original Message-----
From: Vijaya S [mailto:vijaya@picopeta.com]
Sent: Wednesday, October 27, 2004 11:42 PM
To: bob@proulx.com; debian-user@lists.debian.org
Subject: CDRW not working on debian
Hi Bob,
i saw your reply on the following link and i did follow it.
http://lists.debian.org/debian-user/2003/12/msg01942.html
sh-2.05b# dmesg | grep ATAPI
hdc: SAMSUNG CD-ROM SC-152G, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST GCE-8525B, ATAPI CD/DVD-ROM drive
hdc: ATAPI 52X CD-ROM drive, 128kB Cache
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
sh-2.05b#
lspci
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset
Host Bridge
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
0000:00:0a.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro
100] (rev 08)
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80)
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378
[S3 UniChrome] Integrated Video (rev 01)
sh-2.05b#
kernel version has been 2.4.22
#cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a "#", and everything on the line after them are ignored.
ide-cd ignore=hdc
ide-generic
ide-probe-mod
ide-scsi
i have added to /etc/modules.conf
alias scd0 srmod
alias scsi_hostadapter ide-scsi
options ide-cd ignore=hdd
You stated that "Note that in 2.4.22 ide-probe became
ide-detect. " it wasnt clear to me ..
my /etc/fstab reads as follows
cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda1 / ext3 defaults,errors=remount-ro
0 1
/dev/hda2 /home ext3 defaults 0 2
/dev/hda5 /usr ext3 defaults 0 2
/dev/hda6 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
/dev/cdrom /cdrom iso9660 ro,user,noauto 0
0
/dev/cdrw /cdrw iso9660 ro,user,noauto 0
0
but when i do cdrecord -scanbus i get the follwong
# cdrecord -scanbus
Cdrecord-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original
version.
Please send bug reports and support requests to
<cdrtools@packages.debian.org>.
The original author should not be bothered with problems of this
version.
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open
SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you
are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord:
cdrecord: For more information, install the cdrtools-doc
cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup .
Could you pls help me out in getting it to work
or if anyone could help me out
Thanks and regards,
Vijaya
--
To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org
Reply to: