dead X install
howdy
I just installed deb testing on my machine using the net install and I am having trouble loading X.
I can boot to terminal fine, though when X is started the screen goes blank. I can ssh in for a while and then the system stops responding.
I am running nforce mobo.
Any help would be greatly appreciated
Cheers
Blake
--------------------------XF86Config-4 ----------------------------------
# XF86Config-4 (XFree86 X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "svga"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 23-80
VertRefresh 40-150
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
-------------------- XFree86.0.log ------------------------
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-4 20040529113443 root@cyberhq.internal.cyberhqz.com)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.6-rc3-bk9 i686 [ELF]
Build Date: 29 May 2004
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.26-1-386 (horms@tabatha) (gcc version 3.3.4 (Debian 1:3.3.4-3)) #1 Thu Jul 22 12:46:23 JST 2004
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Sep 10 07:38:08 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc104"
(**) XKB: model: "pc104"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
-------------------- messages ---------------------------------
Sep 10 10:59:14 localhost syslogd 1.4.1#15: restart.
Sep 10 10:59:14 localhost kernel: klogd 1.4.1#15, log source = /proc/kmsg started.
Sep 10 10:59:14 localhost kernel: Inspecting /boot/System.map-2.4.26-1-386
Sep 10 10:59:14 localhost kernel: Loaded 18545 symbols from /boot/System.map-2.4.26-1-386.
Sep 10 10:59:14 localhost kernel: Symbols match kernel version 2.4.26.
Sep 10 10:59:14 localhost kernel: Loaded 523 symbols from 22 modules.
Sep 10 10:59:14 localhost kernel: Linux version 2.4.26-1-386 (horms@tabatha) (gcc version 3.3.4 (Debian 1:3.3.4-3)) #1 Thu Jul 22 12:46:23 JST 2004
Sep 10 10:59:14 localhost kernel: BIOS-provided physical RAM map:
Sep 10 10:59:14 localhost kernel: BIOS-e820: 0000000000000000 - 0000000000080000 (usable)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 0000000000100000 - 000000000dfec000 (usable)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 000000000dfec000 - 000000000dfef000 (ACPI data)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 000000000dfef000 - 000000000dfff000 (reserved)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 000000000dfff000 - 000000000e000000 (ACPI NVS)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Sep 10 10:59:14 localhost kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Sep 10 10:59:14 localhost kernel: 223MB LOWMEM available.
Sep 10 10:59:14 localhost kernel: On node 0 totalpages: 57324
Sep 10 10:59:14 localhost kernel: zone(0): 4096 pages.
Sep 10 10:59:14 localhost kernel: zone(1): 53228 pages.
Sep 10 10:59:14 localhost kernel: zone(2): 0 pages.
Sep 10 10:59:14 localhost kernel: ACPI: RSDP (v000 ASUS ) @ 0x000f8060
Sep 10 10:59:14 localhost kernel: ACPI: RSDT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x0dfec000
Sep 10 10:59:14 localhost kernel: ACPI: FADT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x0dfec100
Sep 10 10:59:14 localhost kernel: ACPI: BOOT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x0dfec040
Sep 10 10:59:14 localhost kernel: ACPI: MADT (v001 ASUS A7N266VM 0x42302e31 MSFT 0x31313031) @ 0x0dfec080
Sep 10 10:59:14 localhost kernel: ACPI: DSDT (v001 ASUS A7N266VM 0x00001000 MSFT 0x0100000b) @ 0x00000000
Sep 10 10:59:14 localhost kernel: ACPI: Local APIC address 0xfee00000
Sep 10 10:59:14 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 10 10:59:14 localhost kernel: Processor #0 Pentium(tm) Pro APIC version 16
Sep 10 10:59:14 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Sep 10 10:59:14 localhost kernel: Kernel command line: root=/dev/hda2 ro
Sep 10 10:59:14 localhost kernel: Found and enabled local APIC!
Sep 10 10:59:14 localhost kernel: Initializing CPU#0
Sep 10 10:59:14 localhost kernel: Detected 1529.400 MHz processor.
Sep 10 10:59:14 localhost kernel: Console: colour VGA+ 80x25
Sep 10 10:59:14 localhost kernel: Calibrating delay loop... 3053.97 BogoMIPS
Sep 10 10:59:14 localhost kernel: Memory: 220572k/229296k available (1080k kernel code, 8212k reserved, 466k data, 92k init, 0k highmem)
Sep 10 10:59:14 localhost kernel: Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Sep 10 10:59:14 localhost kernel: Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Sep 10 10:59:14 localhost kernel: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Sep 10 10:59:14 localhost kernel: Buffer cache hash table entries: 16384 (order: 4, 65536 bytes)
Sep 10 10:59:14 localhost kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep 10 10:59:14 localhost kernel: CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
Sep 10 10:59:14 localhost kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Sep 10 10:59:14 localhost kernel: CPU: L2 Cache: 256K (64 bytes/line)
Sep 10 10:59:14 localhost kernel: CPU: AMD Athlon(TM) XP 1800+ stepping 01
Sep 10 10:59:14 localhost kernel: Enabling fast FPU save and restore... done.
Sep 10 10:59:14 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Sep 10 10:59:14 localhost kernel: Checking 'hlt' instruction... OK.
Sep 10 10:59:14 localhost kernel: Checking for popad bug... OK.
Sep 10 10:59:14 localhost kernel: POSIX conformance testing by UNIFIX
Sep 10 10:59:14 localhost kernel: enabled ExtINT on CPU#0
Sep 10 10:59:14 localhost kernel: ESR value before enabling vector: 00000000
Sep 10 10:59:14 localhost kernel: ESR value after enabling vector: 00000000
Sep 10 10:59:14 localhost kernel: Using local APIC timer interrupts.
Sep 10 10:59:14 localhost kernel: calibrating APIC timer ...
Sep 10 10:59:14 localhost kernel: ..... CPU clock speed is 1529.4089 MHz.
Sep 10 10:59:14 localhost kernel: ..... host bus clock speed is 265.9841 MHz.
Sep 10 10:59:14 localhost kernel: cpu: 0, clocks: 2659841, slice: 1329920
Sep 10 10:59:14 localhost kernel: CPU0<T0:2659840,T1:1329920,D:0,S:1329920,C:2659841>
Sep 10 10:59:14 localhost kernel: ACPI: Subsystem revision 20040326
Sep 10 10:59:14 localhost kernel: ACPI: Interpreter disabled.
Sep 10 10:59:14 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1b20, last bus=2
Sep 10 10:59:14 localhost kernel: PCI: Using configuration type 1
Sep 10 10:59:14 localhost kernel: PCI: Probing PCI hardware
Sep 10 10:59:14 localhost kernel: PCI: ACPI tables contain no PCI IRQ routing entries
Sep 10 10:59:14 localhost kernel: PCI: Probing PCI hardware (bus 00)
Sep 10 10:59:14 localhost kernel: PCI: Using IRQ router default [10de/01b2] at 00:01.0
Sep 10 10:59:14 localhost kernel: Linux NET4.0 for Linux 2.4
Sep 10 10:59:14 localhost kernel: Based upon Swansea University Computer Society NET3.039
Sep 10 10:59:14 localhost kernel: Initializing RT netlink socket
Sep 10 10:59:14 localhost kernel: Starting kswapd
Sep 10 10:59:14 localhost kernel: VFS: Disk quotas vdquot_6.5.1
Sep 10 10:59:14 localhost kernel: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
Sep 10 10:59:14 localhost kernel: devfs: boot_options: 0x0
Sep 10 10:59:14 localhost kernel: Detected PS/2 Mouse Port.
Sep 10 10:59:14 localhost kernel: pty: 256 Unix98 ptys configured
Sep 10 10:59:14 localhost kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Sep 10 10:59:14 localhost kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Sep 10 10:59:14 localhost kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Sep 10 10:59:14 localhost kernel: COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. <info@itc.hu>
Sep 10 10:59:14 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Sep 10 10:59:14 localhost kernel: Initializing Cryptographic API
Sep 10 10:59:14 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Sep 10 10:59:14 localhost kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes
Sep 10 10:59:14 localhost kernel: TCP: Hash tables configured (established 16384 bind 32768)
Sep 10 10:59:14 localhost kernel: Linux IP multicast router 0.06 plus PIM-SM
Sep 10 10:59:14 localhost kernel: RAMDISK: cramfs filesystem found at block 0
Sep 10 10:59:14 localhost kernel: RAMDISK: Loading 3808 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^Hdone.
Sep 10 10:59:14 localhost kernel: Freeing initrd memory: 3808k freed
Sep 10 10:59:14 localhost kernel: VFS: Mounted root (cramfs filesystem).
Sep 10 10:59:14 localhost kernel: Freeing unused kernel memory: 92k freed
Sep 10 10:59:14 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Sep 10 10:59:14 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
Sep 10 10:59:14 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 10 10:59:14 localhost kernel: NFORCE: IDE controller at PCI slot 00:09.0
Sep 10 10:59:14 localhost kernel: NFORCE: chipset revision 195
Sep 10 10:59:14 localhost kernel: NFORCE: not 100%% native mode: will probe irqs later
Sep 10 10:59:14 localhost kernel: NFORCE: BIOS didn't set cable bits correctly. Enabling workaround.
Sep 10 10:59:14 localhost kernel: NFORCE: BIOS didn't set cable bits correctly. Enabling workaround.
Sep 10 10:59:14 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Sep 10 10:59:14 localhost kernel: NFORCE: 00:09.0 (rev c3) UDMA100 controller
Sep 10 10:59:14 localhost kernel: ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
Sep 10 10:59:14 localhost kernel: ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
Sep 10 10:59:14 localhost kernel: hda: ST340014A, ATA DISK drive
Sep 10 10:59:14 localhost kernel: hdb: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
Sep 10 10:59:14 localhost kernel: blk: queue ce8263e0, I/O limit 4095Mb (mask 0xffffffff)
Sep 10 10:59:14 localhost kernel: hdc: ST340014A, ATA DISK drive
Sep 10 10:59:14 localhost kernel: blk: queue ce826834, I/O limit 4095Mb (mask 0xffffffff)
Sep 10 10:59:14 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Sep 10 10:59:14 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Sep 10 10:59:14 localhost kernel: hda: attached ide-disk driver.
Sep 10 10:59:14 localhost kernel: hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Sep 10 10:59:14 localhost kernel: hdc: attached ide-disk driver.
Sep 10 10:59:14 localhost kernel: hdc: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Sep 10 10:59:14 localhost kernel: Partition check:
Sep 10 10:59:14 localhost kernel: /dev/ide/host0/bus0/target0/lun0: p1 p2
Sep 10 10:59:14 localhost kernel: /dev/ide/host0/bus1/target0/lun0: p1 p2
Sep 10 10:59:14 localhost kernel: Journalled Block Device driver loaded
Sep 10 10:59:14 localhost kernel: EXT3-fs: INFO: recovery required on readonly filesystem.
Sep 10 10:59:14 localhost kernel: EXT3-fs: write access will be enabled during recovery.
Sep 10 10:59:14 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 10 10:59:14 localhost kernel: EXT3-fs: recovery complete.
Sep 10 10:59:14 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 10 10:59:14 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 10 10:59:14 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 10 10:59:14 localhost kernel: Adding Swap: 489928k swap-space (priority -1)
Sep 10 10:59:14 localhost kernel: Adding Swap: 489928k swap-space (priority -2)
Sep 10 10:59:14 localhost kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
Sep 10 10:59:14 localhost kernel: Real Time Clock Driver v1.10f
Sep 10 10:59:14 localhost kernel: hdb: attached ide-cdrom driver.
Sep 10 10:59:14 localhost kernel: hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Sep 10 10:59:14 localhost kernel: Uniform CD-ROM driver Revision: 3.12
Sep 10 10:59:14 localhost kernel: kjournald starting. Commit interval 5 seconds
Sep 10 10:59:14 localhost kernel: EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,2), internal journal
Sep 10 10:59:14 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Sep 10 10:59:14 localhost kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.
Sep 10 10:59:14 localhost kernel: eth0: forcedeth.c: subsystem: 01043:0c11 bound to 00:04.0
Sep 10 10:59:14 localhost kernel: SCSI subsystem driver Revision: 1.00
Sep 10 10:59:14 localhost kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Sep 10 10:59:14 localhost kernel: Intel 810 + AC97 Audio, version 0.24, 12:50:17 Jul 22 2004
Sep 10 10:59:14 localhost kernel: PCI: Enabling device 00:06.0 (0005 -> 0007)
Sep 10 10:59:14 localhost kernel: i810: NVIDIA nForce Audio found at IO 0xe000 and 0xe100, MEM 0x0000 and 0x0000, IRQ 11
Sep 10 10:59:14 localhost kernel: i810_audio: Audio Controller supports 6 channels.
Sep 10 10:59:14 localhost kernel: i810_audio: Defaulting to base 2 channel mode.
Sep 10 10:59:14 localhost kernel: i810_audio: Resetting connection 0
Sep 10 10:59:14 localhost kernel: ac97_codec: AC97 Audio codec, id: ALG32 (ALC650)
Sep 10 10:59:14 localhost kernel: i810_audio: AC'97 codec 0 supports AMAP, total channels = 6
Sep 10 10:59:14 localhost kernel: usb.c: registered new driver usbdevfs
Sep 10 10:59:14 localhost kernel: usb.c: registered new driver hub
Sep 10 10:59:14 localhost kernel: usb-ohci.c: USB OHCI at membase 0xce879000, IRQ 10
Sep 10 10:59:14 localhost kernel: usb-ohci.c: usb-00:02.0, nVidia Corporation nForce USB Controller
Sep 10 10:59:14 localhost kernel: usb.c: new USB bus registered, assigned bus number 1
Sep 10 10:59:14 localhost kernel: hub.c: USB hub found
Sep 10 10:59:14 localhost kernel: hub.c: 3 ports detected
Sep 10 10:59:14 localhost kernel: usb-ohci.c: USB OHCI at membase 0xce927000, IRQ 10
Sep 10 10:59:14 localhost kernel: usb-ohci.c: usb-00:03.0, nVidia Corporation nForce USB Controller (#2)
Sep 10 10:59:14 localhost kernel: usb.c: new USB bus registered, assigned bus number 2
Sep 10 10:59:14 localhost kernel: hub.c: USB hub found
Sep 10 10:59:14 localhost kernel: hub.c: 3 ports detected
Sep 10 10:59:14 localhost kernel: hub.c: new USB device 00:02.0-2, assigned address 2
Sep 10 10:59:14 localhost kernel: usb.c: USB device 2 (vend/prod 0x45e/0x40) is not claimed by any active driver.
Sep 10 10:59:14 localhost kernel: usb.c: registered new driver hiddev
Sep 10 10:59:14 localhost kernel: usb.c: registered new driver hid
Sep 10 10:59:14 localhost kernel: input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical<AE>] on usb1:2.0
Sep 10 10:59:14 localhost kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
Sep 10 10:59:14 localhost kernel: hid-core.c: USB HID support drivers
Sep 10 10:59:14 localhost kernel: mice: PS/2 mouse device common for all mice
Sep 10 10:59:15 localhost kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
Sep 10 10:59:15 localhost kernel: parport0: irq 7 detected
Sep 10 10:59:15 localhost kernel: lp0: using parport0 (polling).
Sep 10 10:59:18 localhost kernel: NET4: AppleTalk 0.18a for Linux NET4.0
Sep 10 10:59:57 localhost kernel: spurious 8259A interrupt: IRQ7.
Sep 10 11:00:02 localhost papd[950]: [main.c:278]: I:PAPDaemon: restart (1.6.4)
Attachment:
signature.asc
Description: This is a digitally signed message part
Reply to: