minicom+setserial

[Vijaya S <vijaya@picopeta.com>]

hi all,
i inserted a two PCI serial port card into a debian machine
i used dpkg-reconfigure setserial and chose autoserial
when i check
#setserial  -g /dev/ttyS?

i set tthe ttyS2&ttyS3 manually as
setserial /dev/ttyS3 uart 16550A port 0x02e8 irq 3
setserial /dev/ttyS2 uart 16550A port 0x03e8 irq 4

#setserial -g /dev/ttyS?
/dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4
/dev/ttyS1, UART: 16550A, Port: 0x02f8, IRQ: 3
/dev/ttyS2, UART: 16550A, Port: 0x03e8, IRQ: 4
/dev/ttyS3, UART: 16550A, Port: 0x02e8, IRQ: 3


but when i type minicom -s and try to open nothing happens i \dont ge
thte prompt of the device i have connected

how do i get it going?

Regards
Vijaya