Re: Getting photos from USB compactFlash into linux
At the end of this transcript I found dmesg error:
usb 3-2: new full speed USB device using address 20
usb 3-2: device not accepting address 20, error -71
I am using hotplug package not usbmgr package.
I have read somewhere that the USB device not accepting new address
means that the host-controller doesn't get an interrupt, and that this
often is because of ACPI.
Still not working. Will try some more tomorrow.
root@a2000xp:# fdisk -l /dev/sda
root@a2000xp:# fdisk -l /dev/sd*
root@a2000xp:# mount -t vfat /dev/sda1 /usb
mount: /dev/sda1 is not a valid block device
root@a2000xp:/home/jfields# mount -t vfat /dev/sda /usb
mount: /dev/sda is not a valid block device
root@a2000xp:/home/jfields# ls -l /usb
total 0
root@a2000xp:/home/jfields# mount -t vfat /dev/sda2 /usb
mount: /dev/sda2 is not a valid block device
root@a2000xp:/home/jfields# mount -t vfat /dev/sda3 /usb
mount: /dev/sda3 is not a valid block device
root@a2000xp:/home/jfields# mount -t vfat /dev/sda4 /usb
mount: /dev/sda4 is not a valid block device
root@a2000xp:/home/jfields# mount -t vfat /dev/sda5 /usb
mount: /dev/sda5 is not a valid block device
root@a2000xp:/home/jfields# mount -t vfat /dev/sda6 /usb
mount: /dev/sda6 is not a valid block device
root@a2000xp:/home/jfields# mount -t vfat /dev/sda7 /usb
mount: /dev/sda7 is not a valid block device
root@a2000xp:/home/jfields# mount -t vfat /dev/sda8 /usb
mount: /dev/sda8 is not a valid block device
root@a2000xp:/home/jfields# fdisk /dev/sda
Unable to open /dev/sda
root@a2000xp:/home/jfields# fdisk /dev/sdb
Unable to open /dev/sdb
root@a2000xp:/home/jfields# fdisk /dev/sdc
Unable to open /dev/sdc
root@a2000xp:/home/jfields# ls -l /dev/sd*
brw-rw---- 1 root disk 8, 0 Apr 14 2001 /dev/sda
...
root@a2000xp:~# dmesg
Linux version 2.6.7-1-k7 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.4 (Debian 1:3.3.4-2)) #1 Thu Jul 8 06:45:35 EDT 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa2c0
ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000
ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0030
ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: BOOT_IMAGE=Linux ro root=301
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1659.452 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Memory: 512440k/524224k available (1500k kernel code, 11020k reserved, 668k data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3301.37 BogoMIPS
Security Scaffold v1.0.0 initialized
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2000+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1659.0406 MHz.
..... host bus clock speed is 265.0504 MHz.
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4288k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS18 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f72a0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5d47, dseg 0xf0000
spurious 8259A interrupt: IRQ7.
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4288 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS735 ATA 100 (2nd gen) controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST380021A, ATA DISK drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: CD-ROM 45X/A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4980140k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda1, internal journal
Real Time Clock Driver v1.12
warning: process `update' used the obsolete bdflush system call
Fix your initscripts?
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
sis900.c: v1.08.07 11/02/2003
eth0: Realtek RTL8201 PHY transceiver found at address 1.
eth0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xd000, IRQ 10, 00:0a:e6:8a:53:b2.
Intel 810 + AC97 Audio, version 1.01, 07:03:46 Jul 8 2004
i810: SiS 7012 found at IO 0xd400 and 0xdc00, MEM 0x0000 and 0x0000, IRQ 10
i810_audio: Audio Controller supports 2 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 codec, id: CMI65 (CMedia)
AC97 codec does not have proper volume support.
i810_audio: only 48Khz playback available.
i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
Linux agpgart interface v0.100 (c) Dave Jones
NET: Registered protocol family 17
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Capability LSM initialized
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
eth0: Media Link On 10mbps half-duplex
eth0: Media Link On 10mbps half-duplex
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f17c0(lo)
IPv6 over IPv4 tunneling driver
agpgart: Detected SiS 735 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:02.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:02.2: irq 10, pci mem e083b000
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:02.3: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:02.3: irq 5, pci mem e085b000
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:13.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:13.0: irq 11, io base 0000c800
uhci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:13.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:13.1: irq 11, io base 0000cc00
uhci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:00:13.2: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:13.2: irq 10, pci mem e0ca1f00
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:13.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
eth0: no IPv6 routers present
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
usb 3-2: new full speed USB device using address 2
usb 3-2: device not accepting address 2, error -71
usb 3-2: new full speed USB device using address 3
usb 3-2: device not accepting address 3, error -71
usb 3-2: new full speed USB device using address 4
usb 3-2: device not accepting address 4, error -71
NET: Registered protocol family 4
NET: Registered protocol family 3
NET: Registered protocol family 5
usb 3-2: new full speed USB device using address 5
usb 3-2: device not accepting address 5, error -71
usb 3-2: new full speed USB device using address 6
usb 3-2: device not accepting address 6, error -71
usb 3-2: new full speed USB device using address 7
usb 3-2: device not accepting address 7, error -71
usb 3-2: new full speed USB device using address 8
usb 3-2: device not accepting address 8, error -71
usb 3-2: new full speed USB device using address 9
usb 3-2: device not accepting address 9, error -71
usb 3-2: new full speed USB device using address 10
usb 3-2: device not accepting address 10, error -71
usb 3-2: new full speed USB device using address 11
usb 3-2: device not accepting address 11, error -71
usb 3-2: new full speed USB device using address 12
usb 3-2: device not accepting address 12, error -71
usb 3-2: new full speed USB device using address 13
usb 3-2: device not accepting address 13, error -71
usb 3-2: new full speed USB device using address 14
usb 3-2: device not accepting address 14, error -71
usb 3-2: new full speed USB device using address 15
usb 3-2: device not accepting address 15, error -71
usb 3-2: new full speed USB device using address 16
usb 3-2: device not accepting address 16, error -71
usb 3-2: new full speed USB device using address 17
usb 3-2: device not accepting address 17, error -71
usb 3-2: new full speed USB device using address 18
usb 3-2: device not accepting address 18, error -71
hub 3-0:1.0: connect-debounce failed, port 2 disabled
usb 3-2: new full speed USB device using address 19
usb 3-2: device not accepting address 19, error -71
usb 3-2: new full speed USB device using address 20
usb 3-2: device not accepting address 20, error -71
root@a2000xp:~#
--- On Tue 08/03, Andrew Perrin < clists@perrin.socsci.unc.edu > wrote:
From: Andrew Perrin [mailto: clists@perrin.socsci.unc.edu]
To: j1234f@excite.com
Cc: kantai@gamebox.net, debian-user@lists.debian.org
Date: Tue, 3 Aug 2004 08:45:00 -0400 (EDT)
Subject: Re: Getting photos from USB compactFlash into linux
On Tue, 3 Aug 2004, J F wrote:<br><br>> root@a2000xp:/etc# mount -t vfat /dev/sda1 /usb<br>> mount: /dev/sda1 is not a valid block device<br>> root@a2000xp:/etc# mount -t vfat /dev/sda2 /usb<br>> mount: /dev/sda2 is not a valid block device<br>> root@a2000xp:/etc# ls -ld /usb<br>> drwxr-xr-x 2 root root 4096 Jul 28 19:47 /usb<br>> root@a2000xp:/etc# mount -t vfat /dev/sda /usb<br>> mount: /dev/sda is not a valid block device<br><br>Are you sure it's attached to sda? Try:<br><br>fdisk -l /dev/sda<br>fdisk -l /dev/sdb<br>fdisk -l /dev/sdc<br>fdisk -l /dev/sdd<br><br>etc. to figure out which has a filesystem.<br><br>ap<br><br><br><br>----------------------------------------------------------------------<br>Andrew J Perrin - http://www.unc.edu/~aperrin<br>Assistant Professor of Sociology, U of North Carolina, Chapel Hill<br>clists@perrin.socsci.unc.edu * andrew_perrin (at) unc.edu<br><br><br><br>
_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
Reply to: